Removing The Stand; Mounting The Tv On A Wall - Sharp Aquos LC-60LE631M Operation Manual

Removing the stand

For wall mounting with the optional bracket (AN-52AG4) remove the stand.
Before setting TV on the wall
• Remove the connected cables (DVD, VCR, etc) from the terminals.
• Detach the four caps at the 4 locations on the rear of the TV.
1
Unfasten the screws at the 4 locations on
the rear of the stand.
NOTE
• To attach the stand, perform the above steps in reverse order.
• As the TV is very heavy, be careful when moving it.

Mounting the TV on a wall

To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations on the rear
of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of
the TV.
• This TV should be mounted on a wall only with the wall mount bracket available from SHARP (See page 23).
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• Mounting the LCD colour TV requires special skills and should only be performed by qualifi ed service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for
improper mounting or mounting that results in accident or injury.
• You can ask qualifi ed service personnel about using an optional bracket to mount the TV to a wall.
• When you mount the TV on a wall, you should attach the supporting post.
• Detach the AC cord holder on the rear of the TV before mounting the TV on a wall.
Hanging on the wall
AN-52AG4 wall mount bracket (see the bracket
instructions for details).
Vertical mounting
24
1
2
1
Angular mounting
2
Detach the stand from the TV (hold the stand so it
will not drop from the edge of the base area).
About setting the TV angle
AN-52AG4