Software - Canon EOS 7D Mark II Instruction Manual

w Printing
4
Printing Effect
The image will be printed using the printer's standard colors.
EOn
The image's Exif data is used to make automatic corrections.
EOff No automatic correction will be applied.
The image will be printed with higher saturation to produce
EVIVID
more vivid blues and greens.
Image noise is reduced before printing.
ENR
Prints in black-and-white with true blacks.
0 B/W
0 Cool tone Prints in black-and-white with cool, bluish blacks.
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
Prints the image in the actual colors and contrast. No automatic
zNatural
color adjustments are applied.
Printing characteristics are the same as the "Natural" setting.
zNatural M However, this setting enables finer printing adjustments than
with "Natural."
Printing will differ depending on the printer. For details, refer to
EDefault
the printer's instruction manual.
* When you change the printing effects, changes are reflected in the image
displayed on the upper left of the screen. Note that the printed image may look
slightly different from the displayed image, which is only an approximation. This
also applies to [Brightness] and [Adjust levels] on page 418.
When making a large print of a RAW or RAW+JPEG image, printing a JPEG
73 image created by processing a RAW image (p.398), or printing via
Digital Photo Professional (EOS software, p.537) is recommended.
416
Set the printing effects.
Set them if necessary. If you do not need
to set any printing effects, go to step 5.
Contents displayed on the screen
differ depending on the printer.
Select the setting, then press <0>.
Select the desired printing effect, then
press <0>.
If the <ze> icons are displayed
brightly, you can also adjust the
printing effects (p.418).
Description