Dell E228WFP Service Manual page 11

22"LCD Color Monitor
User Preset
Hue
Saturation
OSD Settings:
Horizontal Position
Vertical Position
OSD Hold Time
OSD Lock
User Preset: Use the plus and minus buttons to increase or decrease each of the
three colors (R, G, B) independently, in single digit increments, from 0 to 100.
This feature can make color shift of video image to green or purple. This is used
to adjust for desired flesh tone color. Use - or + to adjust the hue from '0' to '100'
makes video image shade into greenish.
makes video image shade into purplish.
NOTE: Hue adjustment only available for video playback via DVI using
HD YPbPr.
makes video image looks more monochrome.
makes video image looks more colorful.
NOTE: Saturation adjustment only available for video playback via DVI
using HD YPbPr.
Adjust the settings for the OSD, including the location and the amount of time the
menu remains on-screen.
Position of the OSD:
To adjust the horizontal position of the OSD, use the - and + buttons, and
●
move OSD to the left and right.
To adjust the vertical position of the OSD, use the - and + buttons, and move
●
OSD down and up.
OSD Hold Time:
The OSD stays active for as long as it is in use. Adjusting the hold time, sets the
length of time the OSD remains active after the last time you pressed a button.
Use the - and + buttons to adjust the slider in 5 second increments, from 5 to 60
seconds.
OSD Lock:
Controls user access to adjustments. When Yes (+) is selected, no user
adjustments are allowed. All buttons are locked except the menu button.
NOTE: When the OSD is locked, pressing the menu button takes the user
directly to the OSD settings menu, with OSD Lock selected. Select No (-) to
unlock and allow user access to all applicable settings.
11
Dell E228WFP