Download Print this page

REVELL LWRc-8kW Operational Manual page 7

An air–water heat pump for heating and cooling with a built-in electric boiler

Advertisement

To change Parameter 15, simultaneously press the
of 5 seconds. Only then, by using the arrows, can any change be implemented.
c) Simplified temperature setting adjustment in the heating mode
mode for Parameter 0)
-
The set value (Parameter 1) is displayed by single pressing of the
key; by subsequent pressing it is possible to change this value as required.
3- Time setting
a) Available whether the device is ON or OFF.
b) Press the
key to set the time. When the clock on the display is flashing, press the
key again to set the hour. To change the values press the
Before the flashing stops, press the
press the
and
the water temperature will be displayed. After 30 seconds, the control display will return
to its normal mode.
4- The ON/OFF Timer
a) Press the
key to turn the timer ON. When the indicator light is lit and the time is
flashing, press the
and the
keys. Before the flashing stops, press the
change the values press the
the
key and the water temperature will be displayed. After 30 seconds, the control
display will return to its normal mode.
b) To turn the timer OFF press the
flashing, press the
and the
keys. Before the flashing stops, press the
change the values press the
press the
key and the water temperature will be displayed. After 30 seconds the
control display will return to its normal mode.
5- Cancelling the ON/OFF Timer
a) Press the
or the
If numbers are flashing, press the
LED is displaying the water temperature, the ON/OFF timer has been cancelled. After
30 seconds, the control display will return to its normal mode.
6- Locking and unlocking the keyboard is done by pressing the
keys for a period of 5 seconds
key to set the minutes. To change the values
keys again. When setting is completed, press the
key again to set the hour. To change the values press the
and the
key . When the indicator light is lit and the time is
key again to set the hour. To change the values press the
and the
key to cancel the ON/OFF timer.
key. If the timer indicator light is not lit and the
and
(also applicable in the cooling
key to set the minutes. To
keys. When setting is completed, press
key to set the minutes. To
keys. When the setting is completed,
keys for a period
or the
and the
keys.
key and
+
7

Advertisement

loading