Advertisement
Diagram of the control panel
1- The control display
Water temperature
and time setting
A. When the device is OFF, the display shows the time
B. When the device is ON, the display shows the temperature of the water in the buffer tank
2- Setting mode
a) Switching between the HEATING / COOLING modes
-
To switch between the HEATING / COOLING modes when the device is ON, press
MODE
the
-
The change of mode is indicated by the LED indicator light
b) An overview of the setting of the operational parameters
-
Pressing the
control the settings of the parameters, by using the
parameter number and the value of the specific parameter will be flashing.
-
To change the value of the parameter press the
parameter will start flashing. You can implement any required change by using the
and
After 10 seconds the change will be automatically saved.
key
key for 5 seconds will bring you to Menu, where it is possible to
keys.
Heating
Cooling
and
key briefly and the value of the
keys; the
6
Advertisement
