Instructions For Use - UME BM-30 Operation Manual

4. INSTRUCTIONS FOR USE

4.1 PLACING SCALE
Usethisunitonahardandstrongsurface,
where is free from RF interference,
vibration, fire, direct sunlight and
excessive moisture.
weighing, always place this unit on a
level surface, if necessary, adjust the
adjustable feet underneath the platform
to obtain a level condition.
4.2 POWER THE SCALE
Press ON/OFF to turn scale on.
4.3 INTERNAL SETTINGS
Before weighing, make sure the zero sign
is on and stable.
4.3.1 Select Weight Unit
This unit is equipped with 3 weight unit
modes, i.e. kg, lb and lb/oz.
Default weight unit = kg (without pound
units)
Follow the below step to employ (disable)
the pound weight unit.
a. turn scale off
For accurate
b. press and hold TARE, then press ON/OFF.
Scale displays "F.1"
c. press TARE twice. Scale displays "F.3"
d. press and hold MODE
e. press MODE unit the "lb" signs appear(or
select "kg" to disable the pound unit)
f. press ZERO toconfirmandreturntonormal
operation status.
(If the pound weight is selected) Press
MODE to shift among, lb and lb/oz during
operation.
4.4 TO TARE OFF THE WEIGHT OF A CONTAINER
4.4.1 Place a container onto the platform,
then press TARE to tare off the weight
of this container. After TARE is pressed,
the tare sign appears.
4.4.2 To Clear Container Weight from Memory
To clear the weight of the container,
remove the container and all loads from
the platform and press TARE, then tare
sign would disappear.
4.5 Zero the Weight Displayed When Unloaded
Ifzerosigndoesnotappearwhenunloaded,
press ZERO to reset weight to zero.