Touch Control Panel Model: A934-212C-044 *Importance Note: Please use ONLY the supplied mounting screw as any other mounting screw (screw head) may be too big and may damage the glass panel! ABtUS SINGAPORE PTE LTD ABtUS SINGAPORE PTE LTD www.abtussingapore.com www.abtussingapore.com...
User Operation Guide PRODUCT DESCRIPTION Example Up Setting The ABtUS A934-212C-044 touch control panel uses a standard 4-wire resistive touch panel, which allows up to a total of 32 command code with complete user programmable software. User friendly Software which allows customized programming such as macros setting, feedback events, control commands, etc.
User Operation Guide RX/UP Setting SYSTEM DIAGRAM RX means that the command transmitted can be set base on the RX return command. where as UP will acts as a Push and Pop action, example press and hold for dimming up and release to stop dimming.
User Operation Guide Button Function Name Model: E12C Editor Version 2.2E Once all buttons command code have been setup, the function name and Baud Rate setting for each button can then being Name and set accordingly. Programming Software Example E12C Editor V2.2E Software E12C Editor V2.2E Overview Once all the above setup is completed, the program...
Page 5
User Operation Guide Virtual Links Button Macro setting ITEM DESCRIPTION Buttons : Physical Button location number and Function entry Button 13 to 32 are virtual links button on top of the 12 physical Button 1 to 12 allows a total 32 buttons to (Button number 1 to 12) be configure with this touch control panel.
User Operation Guide Button Layout Button Function Name and Baud Rate Setting The UI layout on the touch panel can be configure into the following: Once all buttons command code have been setup, the function name and Baud Rate setting of each button can then being Name...
Page 7
User Operation Guide Example Replacement of UI design Procedure of having the designed UI replaced : Example : UI layout design in Landscape and Portrait * Specifications are subject to changes without notice.
Page 8
User Operation Guide Upload of program Upload of program Once a programming setup is done, program can be uploaded to the Touch Control panel accordingly : * Specifications are subject to changes without notice.