Canon PowerShot TX1 User Manual page 54

* Displays when pressing the shutter halfway. Since the camera
automatically readjusts the ISO speed, shutter speed and aperture value
for the optimal settings when using the flash, settings displayed in
shooting information may differ from the actual settings.
** Displays when remaining available internal memory (buffer) is half or less
during movie recording. When the buffer warning indicates full, shooting
or recording may stop.
the camera there
insufficient illumination and a slow shutter speed will be
selected. Shoot using the following methods.
- Set IS mode to a setting other than [Off] (p. 31).
- Raise the ISO speed (p. 65).
- Set the Auto ISO Shift to [On] (p. 66).
- Select a setting other than ~ (flash off)
(Basic Guide p. 15).
- Attach the camera to a tripod or other device.
Playback Information (Playback Mode)
Standard
' ' - - - - - - - - - - - - - ' 1
n
WAVE Format Sound (p. 89)
Folder Number-File Number
I
Shooting DatelTime
~,m
Protection Status (p. 98)
~~!:]
Compression (Still Images) (p. 31)
' - - - - - - - - - - - 1
16
Total number of images
Displayed image number
1I1m1m1i]m~
Recording Pixels (Still Images) (p. 31)
[ill
Movie (p. 79)