Canon PowerShot TX1 User Manual page 157

~
..,
o
c
C"
CD
tA
;r
o
o ....
:i"
(Q
II
Higher ISO speeds and the (High
ISO Auto) setting may increase
image noise. For higher image
quality, select as Iowan ISO speed
as possible (p. 65).
.In
~,
rI,
[g,
~
and
~
modes,
the ISO speed increases and noise
can
Subject is too far away for .•• Shoot within correct flash range of
flash to reach. the subject when using the built-in
flash (p. 138).
• Raise the ISO speed and then shoot
(p.65).
~!lIJJ.atri ,.c.~'.dll\1~lt.
·.18i_._
.blllllt.ol
,..... fJ s . • wbite.
Subject is too close, • Shoot within correct flash range of
making the flash too the subject when using the built-in
strong. flash (p. 138).
The subject is • Set the exposure compensation to a
overexposed because the negative (-) setting (p. 52).
surroundings are too • Use AE lock or use the spot metering
dark. function (pp. 49, 51
Too much light is shining • Change the shooting angle.
directly into the camera,
or is being reflected off
the subject.
Flash is set to on.
Light from the flash has • This is a phenomenon that occurs
reflected off dust particles with digital cameras and does not
or insects in the air. This constitute a malfunction.
is particularly noticeable
when shooting using the
wide angle.
119