Trouble Shooting; Symbols - Probasics 7050 Operator's Manual

If the Probasics Model 7050 Compressor malfunctions, refer to the trouble shooting
chart below for probable cause and remedy. If the unit fails to operate correctly after
using the troubleshooting chart below, contact your Homecare Dealer for further
assistance.
TROUBLE
A. Unit not operating
B. Limited air flow
C. All other problems

TROUBLE SHOOTING

TROUBLE SHOOTING CHART
PROBABLE
CAUSE
1. Plug not firmly in wall.
2. No power at wall outlet
1. Faulty Delivery Tubing.
2. Leak
Blocked intake filter.

Symbols

UL 60601-1 Table DI, IEC symbols
7
REMEDY
1. Check plug at outlet .
2. Check power source,
fuse in house
1. Disconnect delivery tubing
at outlet . If proper flow is
restored, check
equipment and tubing for
obstructions or kinks.
Replace if needed.
2. Check fitting at outlet and
tubing.
3. Replace air intake filter.
1. Contact Homecare Dealer.