Volume Level - Denon AVR-X1200W Owner's Manual

Contents Connections
ZONE2 Setup
Makes settings for audio playback with ZONE2.
0 Values set for "Volume Limit" and "Pow.On Volume" are displayed according to the
setting specified for the volume "Scale" (v p. 157).
o Volume Level
Set the volume output level.
Variable
(Default) :
1 – 98
(–79.5 dB – 18.0 dB):
Front panel Display
Playback
Volume can be adjusted.
Volume is fixed at the desired level. The
volume cannot be adjusting using the
remote control unit.
Rear panel
Settings
o Volume Limit
Make a setting for maximum volume.
60 (-20 dB) / 70 (-10 dB) / 80 (0 dB)
(Default : 70 (-10 dB))
Off:
0 This can be set when "Volume Level" is set to "Variable". (v p. 209)
o Pow.On Volume
Define the volume setting that is active when the power is turned on.
Last
(Default) :
Mute:
1 – 98
(–79.5 dB – 18.0 dB):
0 This can be set when "Volume Level" is set to "Variable". (v p. 209)
209
Remote
Tips Appendix
Do not set a maximum volume.
Use the memorized setting from the last
session.
Always use the muting on condition.
The volume is adjusted to the set level.
Index