Remote Control; Connecting To An Antenna Or Cable; Other Connections - LG 50LF6100 Owner's Manual

y Depending upon the graphics card, some
y
resolution settings may not allow the image to
be positioned on the screen properly.

Connecting to an Antenna or Cable

Connect an antenna, cable, or cable box to watch
TV. The RF cable may not be supplied, depending
upon the model.
CAUTION
y Make sure not to bend the copper wire of the RF
y
cable.
Copper wire
y Complete all connections between devices,
y
and then connect the power cord to the power
outlet to prevent damage to your TV.
NOTE
y Use a signal splitter to use 2 TVs or more.
y
y DTV Audio Supported Codec: MPEG, Dolby
y
Digital.

Other Connections

Connect your TV to external devices. For the best
picture and audio quality, connect the external
device and the TV with the HDMI cable. Depending
upon the model, a cable may not be provided.

Remote Control

(Depending upon model)
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the
to the label inside the compartment, and close the
battery cover. Failure to match the correct polarities
of the battery may cause the battery to burst or
leak, resulting in fire, personal injury, or ambient
pollution. To remove the batteries, perform the
installation actions in reverse. This remote uses
infrared light. When in use, it should be pointed in
the direction of the TV's remote sensor.
CAUTION
y Do not mix old and new batteries,
y
as this may damage the remote control.
10
A
(POWER) Turns the TV on or off.
Number button Enters numbers.
- (Dash) Inserts a dash between numbers such as
2-1 and 2-2.
selected (pressing repeatedly).
B
Accesses your favorite channel list.
and ends
Navigation buttons Scrolls through menus or
options. (up/down/left/right)
input.
Clears all on-screen displays and returns to TV
viewing.
A
Activates or deactivates the subtitles.
Selects an AV mode.
Resizes an image.
Changes the input source.
Accesses the saved channel list.
Alternates between the two last channels
B
Adjusts the volume level.
Shows information on the current program.
Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.
Accesses the main menu.
Accesses the Home menu.
Shows the list of Apps.
Selects menus or options and confirms your
Returns to the previous screen.
Accesses the quick menu.