Miele FN 11827 S Operating And Installation Instructions page 38

Installing in a side-by-side combination
Attaching the connecting bracket will
ensure the heights of the two
appliances are aligned.
Start with the appliance on the
right-hand side. If one appliance
protudes at the front more than the
other, start with this appliance:
^ Attach the connecting bracket g so
that the vertical long slots are on the
side that will first be fastened to an
appliance. Loosely attach the screws
h.
^ Slide the connecting bracket g
across until the centre notch of the
plate hooks onto the side wall of the
appliance.
^ The two screws h can now be
tightened.
^ Screw the connecting bracket g to
the second appliance. Depending on
how they stand together, push the
two appliances together a little.
38
Assembly steps on the rear of the
appliances
^ Fit the connecting brace i at the top
of the inside walls.
^ Insert the bracket j into the
appropriate gap at the bottom.
^ Tighten the bracket j with the screw
k supplied.
Important: Do not drill a hole for this
screw in the appliance.
To avoid vibrations, neither the
brackets nor the screws should
touch the pipework on the back of
the appliances.