Installing In A Side-By-Side Combination; Installation; Sliding The Two Appliances Into Position - Miele FN 11827 S Operating And Installation Instructions

To avoid a build-up of condensation
and resultant damage, refrigerators and
freezers should not generally be
installed side-by-side.
However, this appliance has side wall
heating, and can be installed
side-by-side with certain other Miele
appliances.
Your Miele Chartered Agent will be able
to advise you on which models are
suitable to being installed side-by-side.

Installation

It is essential that installation of the
appliances is carried out by two
people.
Warning! There is a risk of damage
when moving the appliance
combination. The combination of
appliances is very heavy.
Dents may form on the appliances if
they are not moved correctly. Please
follow the instructions for sliding the
appliances into position.
^ The freezer, or appliance with freezer
section, must be installed to the left
of the refrigerator when viewed from
the front. The side wall heating in the
right-hand wall of the freezer is
designed to prevent the build-up of
condensation between the two
appliances.
^ When sliding the two appliances
together, always hold the front
external corners of the appliances.
^ Place the two appliances as close as
possible to their final position so that
they can be aligned for any

Installing in a side-by-side combination

unevenness in the floor. The back of
the appliances still needs to be kept
accessible to complete the
installation.
Sliding the two appliances into
position
^ Slide the left side and right side
alternately.
– When the combination is directly
in front of the niche:
^ Carefully push the two appliances
back into their final position.
– If the combination needs to be
taken out of the niche again:
^ Hold the appliances in the bottom
third and pull them out straight
towards you.
35