C) Putting On The Pressure Cuff - Carrera 850000 Owner's Manual

2. If you press Time+ M1 or Time– M2 button you increase
or decrease the number.
3. The flashing figure moves on one digit when the Adjust T
button is pushed. The flashing display changes from month to
day, hour and minute, if you press the time button repeatedly.
If you press Time+ M1 or Time– M2 button you increase
or decrease the number.
4. End the setting by pressing the Adjust T button after you
have changed the date.
The number indicating the year disappears behind the time
and is displayed for approx. 1 second when briefly pressing
the Adjust T button.
5. To cancel the setting, leave the appliance without pressing any
buttons. Ten seconds later the display will show the original
display and the current time.

c) Putting on the pressure cuff

1. Insert the air hose plug on the pressure cuff firmly into the left
socket on the measuring device.
2. Open the cuff out into a ring and pull it over the left wrist up
to the left upper arm (without clothing).
Position the pressure cuff on the upper arm, around 2-3 cm
above the elbow, as shown in the drawing on the cuff.
3. Pull the cuff end, which is taken through the metal clip, out-
wards across the upper arm and fix it with the Velcro closure.
41