D-Link DSL-2877AL User Manual page 46

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
After clicking the Manual Wireless Connection Setup button, the following page will
be available.
In this section we can configure the following parameters.
Wireless Enable: Tick this option to enable the wireless feature on this router.
MBSSID AP Isolation: Tick this option to enable the MBSSID AP isolation feature
on this router.
Multiple SSID: Enter the Wireless name (SSID) here. This name will be available
when wireless clients scan for available wireless networks. However, when the
Hide Access Point option is enabled, this name will not be visible to wireless
clients.
Hide SSID: Here we can choose to hide the Wireless SSID by selecting Enable to
hide it and Disable to reveal it.
WMF: Here we can enable or disable the Wireless Multimedia Forwarding (WMF)
feature.
802.11 Mode: Here we can select which 802.11 wireless modes to use. Options to
choose from are 802.11 n Only, 802.11 B only, 802.11 G only, Mixed
802.11g and 802.11b, Mixed 802.11g and 802.11n and Mixed 802.11n,
802.11g and 802.11b. If you are not sure, select the 802.11 B/G/N mixed
option.
Channel Width: Here we can select the wireless bandwidth range used. Options to
choose from are Up to 130 Mbps, Up to 270 Mbps and Force to 300 Mbps.
Channel: Here we can select a wireless channel manually, or select the Auto
option to allow the router to automatically select the channel with the least
interference.
Security: Here we can select security to use. Options to choose from are None,
WEP-64Bits, WEP-128Bits, WPA, WPA2 and WPA/WPA 2.
Cipher Type: Here we can select cipher type to use. Options to choose from are
TKIP, AES and Both.
Group Key Interval: Enter the group key interval.
Section 3 - Web User Interface Configuration Page 44