D-Link DSL-2877AL User Manual page 31

D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
In this step, the user can configure the Internet connection settings used by this
router.
In this section we can configure the following parameters.
Internet Connection Type: Select the appropriate connection type to use here.
Options to choose from are ADSL, VDSL and Ethernet WAN (NBN/UFB).
Country: In this drop-down menu, the user can select one of two country options.
They are Australia and New Zealand. To manually configure this connection,
the user can choose the third option called Other.
Internet Service Provider: After selecting a country, in the previous option, a list of
ISP connections will be available here. If your ISP is in the list, select it here
and the correct parameters will be entered for the rest of the page. However, if
your ISP is not listed here, you can choose the Other option.
802.1q: Select Activated or Deactivate.
VLAN ID: Select the appropriate connection type to use here. Options to choose
from are VC-Mux and LLC.
Protocol: Enter the correct Virtual Path Identifier (VPI) value for your ISP here.
MTU: For PPP default value is 1492, for dynamic and static IP are 1500.
Click the Prev button to discard the changes made and return to the previous page.
Click the Next button to continue to the next page.
Click the Cancel button to discard the changes made and return to the main page.
In this step, the user can configure the Internet connection settings used by this
router.
In this section we can configure the following parameters.
Internet Connection Type: Select the appropriate connection type to use here.
Options to choose from are ADSL, VDSL and Ethernet WAN (NBN/UFB).
Protocol: Enter the correct Virtual Path Identifier (VPI) value for your ISP here.
MTU: For PPP default value is 1492, for dynamic and static IP are 1500.
Click the Prev button to discard the changes made and return to the previous page.
Click the Next button to continue to the next page.
Click the Cancel button to discard the changes made and return to the main page.
Section 3 - Web User Interface Configuration Page 29