Related Manuals for Linak MEDLINE MJB
Summary of Contents for Linak MEDLINE MJB
- Page 1 U S E R M A N U A L MJB - Gateway To learn more about LINAK please visit: W W W . L I N A K . C O M...
-
Page 3: Table Of Contents
Contents Preface ... 4 Important information ... 5 Safety instructions ... 5 Residual risk ... 6 Before installation, reinstallation or troubleshooting ... 7 Before start-up ... 7 During operation ... 7 Information on the MJB ... 7 Repairs ... 8 Misc. -
Page 4: Preface
This User Manual will tell you how to install, use and maintain your LINAK equipment. We are sure that your LINAK system will give you many years of problem-free operation. -
Page 5: Important Information
Important information Description of the various signs used in this manual. Warning! Failure to comply with these instructions may result in accidents involving serious personal injury. Failing to follow these instructions can result in the product being damaged or destroyed. Safety instructions Safe use of the system is possible only when the operating instructions are read completely and the instructions contained are strictly observed. -
Page 6: Residual Risk
Cables must be secured safely so that persons cannot get trapped in it. Warning! Always use locking mechanism and O-ring Warning! Sockets not used must be fi tted with blind plugs to ensure IP degree The LINAK products cannot tolerate the infl uence of strong solvents, basic or alkaline liquids. -
Page 7: Before Installation, Reinstallation Or Troubleshooting
MJB as a control unit for 3 Bed detection, USB charger, Under Bed Light etc. LINAK A/S delivers only the OpenBus system and is not responsible for any products other than LINAK products (i.e. products from 3... -
Page 8: Repairs
fi tted. Products under warranty must also be returned to authorised LINAK workshops. Warning! If any of the LINAK products are opened, there will be a risk of subsequent malfunction. Disposal of LINAK’s products LINAK’s products may be disposed of, possibly by dividing them into different waste groups for recycling or combustion. -
Page 9: Misc. On The Mjb System
Furthermore, the products must not be exposed to violent treatment. In the event of this, the warranty will be ineffective / invalid. LINAK’s warranty is only valid if the system is unopened and has been used correctly. -
Page 10: Mjb - Gateway Variant
MJB - GATEWAY variant, 504-01 & 504-02 : The MJB is a simple gateway interface, which can connect the bed to the infrastructure of the hospital or nursing homes. The Gateway can be used in combination with an Out of Bed Sensor, which makes it possible to indicate if the patient leaves the bed. The Gateway can also be used as a service/nurse call system. -
Page 11: Features
Current consumption: • V bus 8V : • V permanent 40V : • Approvals: LINAK and UL International DEMKO A/S are currently in the process of certifying the MJBX0X, re. UL60601 and EN60601-1 = 1A = 125V (DC) / 125V (AC) = 24W (DC) / 62,5VA (AC) <... - Page 12 Relay 1 CB power mode Mains unplugged, CB is in power down or the OpenBus™ is not running (Clock/ data is missing) On mains or battery at “wake up” Relay 2 CB power mode Mains unplugged or CB is in power down On mains or battery at “wake up”...
-
Page 13: Precautions
OOB sensor, squeezed cables. The MJB is not able to detect defective 3 • LINAK only takes responsibility for LINAK products, not 3 Please pay attention to the “Patient Environment” Clause 3.79 - EN60601-1 3... - Page 14 Cable ordering nos.: Modular plug – open end: 0964140-3000 Please note, the slit is placed on the opposite side of the modular plug. This is to ensure that the cable is only being used for the Gateway MJB.
-
Page 15: Ip Protection Degree
IP Protection degree: All LINAK products can be cleaned as follow according to their IP protection, which is stated on the product label. The IP code specifi es the degrees of protection provided by the enclosures. Only the protection against ingress of water (second characteristic numeral) is specifi ed, ingress of solid foreign objects (fi... -
Page 16: Environmental Conditions
Warning! The systems must not be sprayed directly with a high-pressure cleaner. Warning! Interconnecting cables must remain plugged in during cleaning to prevent the ingress of water. Precaution! When cleaned, water must never be sprayed upwards from underneath the bed, because it may enter the cable outlet. Environmental conditions: Environmental conditions Operating:... -
Page 17: Modular Plug With Wide And Narrow Slit
Modular plug with wide slit To be used with LINAK products. Can be connected to all ports in the MJB, both ports with narrow and wide slit. Modular plug with narrow slit To be used with 3 party products. Can only be connected to ports in the MJB with narrow slit. -
Page 18: Keys To Symbols
Key to symbols The following symbols are used on the label on the LINAK products. Type B equipment, as per EN 60601-1 Protection against contact/foreign IPXX matter (first character) and water (second character) as per EN60529 Class 2 equipment For indoor use... - Page 19 Demko approval Fimko approval Australian approval mark Australian approval mark Recognised - Component Mark Canadian Recognised - Component Mark Recognised Component Mark for Canada and the United States T-Mark RW-Tüv approval Tüv.Produkt Service TÜVRheinland C-ETL UL Listing Mark C-UL Listing Mark C-UL US Listing Mark UL Listing Mark UL fi...
-
Page 20: Drawing Appendix
DRAWING APPENDIX MJB - Modular Junction Box... - Page 21 LINAK shall be responsible solely that the LINAK products comply with the specifi cations set out by LINAK and it shall be the responsibility of the LINAK customer to ensure that the specifi c LINAK product can be used for the application...
-
Page 24: Addresses
LINAK cannot guarantee the correct and actual status of said information on its products. While LINAK uses its best efforts to fulfi l orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability of any particular product. Therefore, LINAK...
Need help?
Do you have a question about the MEDLINE MJB and is the answer not in the manual?
Questions and answers