Advertisement
Congratulations on your purchase of DP-300, the versatile digital recorder
for your on hold messages. The key features are:
? 100% digital design - no moving parts to wear and tear
? 4 (DP-300/4) or 8 (DP-300/8) minutes of audio storage
? Non-volatile flash memory - no battery backup required
? Records one long or two short messages
? No special equipment required to record
? Selectable output impedance for best sound quality
? Built-in speaker for testing/monitoring purpose
? Attractive and compact case (6.6" x 4.5" x 1.1")
DP-300 allows the user to record his/her own messages by simply speak-
ing into the internal microphone, or by transferring the audio from an
external player such as a CD player or an MP3 player.
Whether it's used to keep callers informed or entertained, your DP-300 is
an efficient and cost effective tool that turns wasted hold time into pleas-
ant and valuable advertising time for your business.
Package Content
1 x DP-300 Player Unit
1 x Power Adaptor
2 x Audio Patch Cords (one with 1/8" phone plug, one with RCA jack)
1 x User's Manual
1 x Metal Mounting Plate
Installation Guide
POWER Jack
Plug the supplied power adaptor into an AC outlet of proper voltage (speci-
fied on the adaptor's label).
O/P Jack & Button
Connect DP-300 to your phone system with the audio patch cord and
select the proper impedance - push the button in for 600 Ohm or pop it
out for 8 Ohm. If you are not sure, try both and select the one with the
better sound quality.
MESSAGE Switch
DP-300 can be configured to store a single message (message #0) or
two separate messages (message #1 & #2). In the single-message con-
figuration, the entire audio storage is dedicated to message #0. In the
two-message configuration, the audio storage is divided equally. Use the
MESSAGE switch to select which message to record or play. Please note
that if you record message #0, both message #1 and #2 will be erased
automatically. If you record message #1 or #2, message #0 will be erased.
EXT Jack
Connect an external audio source (e.g. a CD player) to this 1/8" stereo
phone jack for recording. The internal microphone will be disabled when
a plug is inserted. Stereo signal will be converted to monaural automati-
cally by DP-300.
REC Button
Push in this button to start recording. The POWER light will turn red to
indicate that the unit is recording. Pop out the button at any time to stop
recording. The recording process will be terminated automatically if the
button is not popped out before the maximum length is reached. When
this happens, the POWER light will blink red and you must pop the but-
ton out to continue.
VOL Dial
Use this dial to turn power on/off and set output volume. The message
automatically starts when power is turned on.
Power Light (on case top)
The power light indicates whether power is on or off. It is normally green,
but turns red when the unit is recording. It blinks red when the maxi-
mum recording length is exceeded.
Speaker Button (on case top)
Press this button once to monitor the message through the internal
speaker. Press it again to turn off the speaker. Note that the MOH out-
put is always on whether the speaker is turned on or not.
Advertisement
