System Reset - Sangean H203D Manual

System reset

If your radio fails to operate correctly, or some digits on the display
are missing or incomplete carry out the following procedure.
. Press and hold down Info button.
. Repeatedly press the Tuning Up/Down buttons until 'System'
shown on the display press the Select button to enter the setting.
. Press the Tuning up/down button until 'Factory Reset' shown on
the display, then press the Select button to enter the setting. If you
wish to perform the reset operation, press the Select button once
again. A full reset of your radio will be performed. All presets and
station lists will be erased.
4. After a system reset a scan of the DAB band will be performed.
In case of malfunction due to electrostatic discharge, reset the
product (reconnection of power source may be required) to resume
normal operation.
0