3D Settings - Panasonic TX-47AS800E Ehelp

3D Settings

1. Display the menu with MENU.
2. Select Picture > 3D Settings
3. Select one of the following items with
3D Detection / 3D Signal Message
L/R Picture Swap
4. Set with
/ and press
To exit the menu screen
●
EXIT
3D Detection
(On (Advance) / On
Selects whether to switch to the 3D mode automatically or not.
On (Advance):
Detects all the 3D format signals and displays the 3D image
automatically.
On:
Detects the particular 3D format signals (Frame Sequential, etc.) and
displays the 3D image automatically.
To view 3D images without any notifications and operations, set to
●
(Advance).
3D Signal Message
(On / Off)
Selects whether to give a notification message when a signal of 3D format is
found or not.
Not valid when 3D Detection
●
For DVB, Component and HDMI input
●
2D→3D Depth
(Max / Mid / Min)
Selects a level of 3D-image depth for viewing converted 2D images.
with /
/ 2D→3D Depth
/ Edge Smoother / Safety Precautions
OK to store.
/ Off)
is set to
- 82 -
and press OK to access.
/ and press OK
/ 3D Adjustment
On (Advance)
to access.
/
On