Custom - Wireless
Ensure the connections are completed before starting network setup.
Network > Network connections
1. Display the menu with MENU.
2. Select
Network
>
/
and press
Confirm the encryption key, settings and position of your access point
●
before starting setup. For details, read the manual of the access point.
3. Select your desired access point with
Available Wireless Networks are displayed automatically.
●
: Encrypted access point
For
WPS(Push button)
●
1) Press
2) Press the WPS button on the access point until the light flashes.
3) Connect the TV with the access point with OK.
– WPS: Wi-Fi Protected Setup™
– If the connection has failed, check the settings and positions of your
access point. And then, follow the on-screen instructions.
For
WPS(PIN)
●
1) Press
2) Enter the PIN code to the access point.
3) Connect the TV with the access point with OK.
For
Manual
●
1) Press
2) You can set up SSID, security type, encryption type, and encryption
key manually.
3) Follow the on-screen instructions and set manually.
– When you use 11n (5 GHz) for the wireless system between the
built-in wireless LAN and access point, select
type.
To search access points again
●
(blue)
To display / hide information of the highlighted access point
●
It is recommended to select the encrypted access point.
●
Network Connection
OK
to access.
(red).
(green).
(yellow).
- 153 -
>
Custom
>
Wireless
/
and press
OK
AES
for the encryption
with
/
/
to access.