Rotary Hammer Safety Warning; Specifications; Standard Accessories; Optional Accessories (Sold Separately) - Hitachi PR-25B Handling Instructions Manual

English
ROTARY HAMMER SAFETY WARNINGS
1. Wear ear protectors.
Exposure to noise can cause hearing loss.
2. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
3. Wear protective glasses to protect your eyes.
4. Properly set the bit holder.
5. Do not touch the bit during or immediately after operation.
The bit becomes very hot during operation and could
cause serious burns.

SPECIFICATIONS

Model
Voltage (by areas)*
Power Input*
No-load speed
Full-load impact rate
Capacity: Drill bit
Core bit
Weight (without cord)
* Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

PR-25B
(1) Case .............................................................................1
(2) Side handle ...................................................................1
(3) Oil feeder ......................................................................1
(4) Wrench .........................................................................1
(5) Syringe ..........................................................................1
(6) Taper shank adapter .....................................................1
(7) Drill bit (tapered shank 14.5 mm) ..................................1
(8) Cotter
PR-38E
(1) Case .............................................................................1
(2) Side Handle ..................................................................1
(3) Oil Feeder .....................................................................1
(4) Wrench .........................................................................1
Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (sold separately)

○ Drill bit
(hexagonal shank, for drilling through-holes)
Code No.
Drill external (
total length
diam.
280 mm
16 mm 944465
19 mm 944466
22 mm 944467
25 mm 944468
28 mm 944495
32 mm 944469
38 mm 944545
5
Code No.
) ( )
total length
505 mm
944470
944471
PR-25B
PR-38E
944472
944473
944496
944474 PR-38E
944546
6. Safe operation depends on one's stable posture.
7. At the start of work, confi rm the oil supply and screw
tightening.
8. When working at a highly elevated location, pay attention
to articles and persons below.
9. Before starting to break, chip or drill into a wall, fl oor or
ceiling, thoroughly confi rm that such items as electric
cables or conduits are not buried inside.
10. Wear a dust mask
Do not inhale the harmful dusts generated in drilling or
chiseling operation. The dust can endanger the health of
yourself and bystanders.
PR-25B
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
1050 W
750 / min.
3000 / min.
25 mm
64 mm
7.3 kg
○ Drill bit
(tapered shank, for drilling anchor holes)
Drill external diam.
11 mm
12 mm
14.3 mm
14.5 mm
17.5 mm
21.5 mm
○ Taper shank adapter
(for installing taper shank drill)
Drill diam.
11, 12, 14.3, 17.5 mm
to be used
Code No.
○ Cotter (Code No. 944477)
(for taper shank adapter)
○ Core bit
(with guide plate, not applicable to cores 25 mm and
29 mm)
PR-38E
1050 W
400 / min.
3000 / min.
38 mm
105 mm
7.5 kg
Code No.
944460
944461
944462
PR-25B
944500
standard accessory
944463
944464
21.5 mm
944475 944476