Advertisement
Page 2 of 2
ORDERING INFORMATION
Specifications
PERFORMANCE: In an installation of 2 lamp 32W luminaires in a room cavity
ratio of 1 reflectance 80% ceiling, 50% wall, 20% floor the C.U. shall no be less
than 0.69. To prevent glare the VCP shall not be less than 88 either lenghtwise
or crosswise (at 100 fc level) and that the average luminance will conform with
the IES RP-24 preferred standard, and have a fixture efficiency of not less than
60%.
MATERIALS: Chassis parts are die formed 22 gauge cold rolled steel. Faceplate
is die formed 20 gauge cold rolled steel with edges hemmed for rigidity.
LOUVER: Post-anodized aluminum.
FINISH: Louver - Low iridescense specular postanodized vertical grain sheet or
Low iridescence reflector matte post-anodized vertical grain sheet. Chassis
exterior - white baked polyester powder coat.
VP PARABOLIC
1' x 4' RECESSED FLUORESCENT 16 CELL PARABOLIC LOUVER
Explanation of Catalog Number. Example: DZA1G16MS140120OC
DZA1G16MS140
STATIC AND AIR SUPPLY/RETURN IES RP24 PREFERRED
Specifications (continued)
ELECTRICAL: Rapid start HPF thermally protected class "P" ballast CBM certi-
fied by ETL if K.O. is within 3" of ballast use wire suitable for at least 90°.
LABELS: Listed by CSA/UL.
Job Information
Lightolier
a Genlyte Thomas Company
Technical Information: (978) 657-7600 • Fax (978) 658-0595
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2002 Genlyte Thomas Group LLC (Lightolier Division)
A0902
Type:
www.lightolier.com
Section 2/Folio G09-25
Advertisement
