Table of Contents
Advertisement
Operation
6
● Viewing the screen
1
Turn the power switch (POWER) ( 4 ) on.
When the power is turned on, the power indicator ( 6 ) lights and the camera image
is displayed. If the image does not appear, check that the coaxial cable is connected
correctly. If batteries are the power source and the power indicator does not light
when the power is turned on, replace the batteries. (Refer to page 9)
2
Adjust brightness
Use the brightness adjustment dial (BRIGHT) ( 5 ) to adjust to
the necessary brightness.
Caution
●
●
The brightness of the LCD varies with the viewing angle. Always view the LCD from
directly in front.
●
●
When the video input terminal is not connected, the monitor switches to power saving
mode, and the LCD becomes dimmer.
● Turning the power off
1
Turn the power switch (POWER) ( 4 ) off.
The power indicator ( 6 ) goes out and the image disappears from the LCD ( 7 ).
7
13
1 2 3 5 4 9
8
Dark
Bright
Brightness
Advertisement
Table of Contents
