Table of Contents
Advertisement
Quick Links
1
Introduction and Package Contents
Introduction
Congratulations on your purchase. You can expect only the
sharpest and most brilliant color images from this monitor.
Featuring easy to use OSD controls and built in speakers, you will
find this monitor both easy to use and a pleasure to look at.
Please unpack the monitor with care, and verify that all the parts
listed below are included. If any parts are missing, please
contact with your local distributor.
Please save the packing box for possible future return for service.
Package Contents
• One LED Monitor
• 12V DC Adapter/Power cord
• D-Sub 15-pin VGA connector Cable
• User's Guide
Hardware Installation
The following sections in this guide give clear, step-by-step
descriptions of the installation process and explain how to use
the monitor for optimum results.
Please pay attention to the Regulations and Warnings Section of
this user's manual before setting up the display monitor. Failure
to do so may inadvertently result in personal injuries or machine
damage.
1
Advertisement
Table of Contents
Related Manuals for CBC LME17
Summary of Contents for CBC LME17
- Page 1 Introduction and Package Contents Introduction Congratulations on your purchase. You can expect only the sharpest and most brilliant color images from this monitor. Featuring easy to use OSD controls and built in speakers, you will find this monitor both easy to use and a pleasure to look at. Please unpack the monitor with care, and verify that all the parts listed below are included.
-
Page 2: Specifications
Specifications Size 17” 19” Output Interface (BNC) x 2 Input Interface (BNC) x 2, (VGA) x 1, (RCA) x 2 (PC Audio) x 1 , (HDMI) x 1 Output video (BNC) x 2 Speaker 1.5W x 2 Display Mode Video 1/ Video 2/ VGA / HDMI AC power AC 100~240V 50/60Hz Input power... - Page 3 Timing Item Resolution H Freq.(kHz) V Freq.(Hz) 640x400@70 31.460 70.080 640x480@60 31.469 59.940 640x480@72 37.861 72.809 640x480@75 37.500 75.000 720x400@70 31.460 70.080 800x600@56 35.156 56.250 800x600@60 37.879 60.317 800x600@72 48.077 72.188 800x600@75 46.875 75.000 1024x768@60 48.363 60.004 1024x768@70 56.476 70.069 1024x768@75 60.023 75.029...
- Page 4 Descriptions The monitor displays PAL or NTSC standard color images in CCTV systems. 2 looping composite video BNC inputs, Audio input RCA, an analog VGA input using 15-pin D-sub, and an HDMI (High Definition Multimedia Input) connector. Features – 17 inch plastic cased / metal cased models –...
-
Page 5: Monitor And Osd Control
Monitor and OSD Control Monitor and OSD Control The LED color monitor has a simple control layout for controlling the monitor and OSD (On Screen Display) functions. The table below summarizes the control keys and their related functions. Keys Function Description Toggle the display between standby mode and on. - Page 6 Note: The message will be displayed on the screen if there’s no VGA signal detected in VGA mode, and the power will be off automatically after 10 seconds. Please press the power button again to restart the monitor. LED Status Display The following table describes the various power states of the LED monitor as represented by different LED colors.
-
Page 7: Osd Control Function List
OSD Control Function List OSD Menu Main OSD function menu Press on front panel to access OSD Main menu functions as following: Picture setup: Setup for overall image quality Audio Setup: Setup of audio inputs General Setup: Setup of basic sittings PIP Setup: Setup for multiple signal display Press the “... -
Page 8: Picture Mode
AV1/AV2 Mode – Picture Mode Press “ ” OR “ ” to select the picture mode 1. Picture Mode “Movie, Vivid, User, Standard” This is used to set the brightness of the screen. 2. Contrast Press “ ” OR “ ” to adjust the parameter. This is used to adjust the image contrast. -
Page 9: Sound Mode
Sound Mode 1. Volume Press “ ” OR “ ” to adjust volume level. 2. Mute Press “ ” OR “ ” to select sound “ Off, On ”. -
Page 10: Setting Mode
Setting Mode 1. Language Press “ ” OR “ ” to select language. Move the display picture left or right. 2. H. Position Press “ ” OR “ ” to adjust the parameter. Adjust the H-size of the display picture 3. - Page 11 2. SubSource Press “ ” OR “ ” to select “AV, VGA” mode. Adjust the size of Sub Source window. 3. Size Press “ ” OR “ ” to select “Large, Small ” Move the position of Sub Source window. 4.
-
Page 12: Vga Mode
VGA Mode – Picture Mode This is used to set the brightness of the screen. 1. Contrast Press “ ” OR “ ” to adjust the parameter. This is used to adjust the image contrast. 2. Brightness Press “ ” OR “ ”... - Page 13 Sound Mode 1. Volume Press “ ” OR “ ” to adjust volume level. 2. Mute Press “ ” OR “ ” to select sound “ Off, On ”.
- Page 14 Setting Mode 1. Language Press “ ” OR “ ” to select language. Move the display picture left or right. 2. H. Position Press “ ” OR “ ” to adjust the parameter. Adjust the H-size of the display picture 3.
- Page 15 PIP/POP Setup Mode 1. Multi Window Press “ ” OR “ ” to select “PIP, POP, Off ” mode. 2. SubSource Press “ ” OR “ ” to select “AV, VGA, HDMI” mode. Adjust the size of Sub Source window. 3.
-
Page 16: Hdmi Mode
HDMI Mode – Picture Mode This is used to set the brightness of the screen. 1. Contrast Press “ ” OR “ ” to adjust the parameter. This is used to adjust the image contrast. 2. Brightness Press “ ” OR “ ” to adjust the parameter. Press “... - Page 17 Sound Mode 1. Volume Press “ ” OR “ ” to adjust volume level. 2. Mute Press “ ” OR “ ” to select sound “ Off, On ”.
- Page 18 Setting Mode 1. Language Press “ ” OR “ ” to select language. Move the display picture left or right. 2. H. Position Press “ ” OR “ ” to adjust the parameter. Adjust the H-size of the display picture 3.
- Page 19 2. SubSource Press “ ” OR “ ” to select “AV, VGA, HDMI” mode. Adjust the size of Sub Source window. 3. Size Press “ ” OR “ ” to select “Large, Small ” Move the position of Sub Source window. 4.
- Page 20 Mounting VESA Bracket Lay the LED display face down on a towel or blanket. Note the 4 screws that secure the hinge on the lower part of the back casing. These may be removed to release the desk mount bracket if required. Attach a VESA compatible mounting bracket (VESA 75mm x 75mm is supported) 4 screw for VESA 75mm...
- Page 21 Dimensions:...
-
Page 22: Caring For Your Led Monitor
Caring for Your LED Monitor Caring for your LED Monitor The LED color monitor is a sensitive piece of electronic equipment. Proper care can prevent accidentally damaging the LCD panel or the monitor itself. By following these guidelines you can ensure many years of trouble free use. 1. -
Page 23: Frequently Asked Questions
Frequently Asked Questions Power button does not respond • Check the power cord to ensure that it is securely plugged into the monitor base and also into the electrical outlet. • Ensure there is electrical power coming from the AC outlet. Use another device to check for power. -
Page 24: Regulations And Maintenance
Regulations and Maintenance FCC compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. - Page 25 Do not insert sharp objects or spill liquid into the LED monitor through cabinet slots. They may cause accident fire, electric shock or failure. Disconnect the power plug from the AC outlet if you will not use it for an indefinite period of time.
- Page 26 Use the proper power cord with correct attachment plug type. If the power source is 120 V AC, use a power cord that has UL and C-UL approvals. If the power source is a 240 V AC supply, use the tandem (T blade) type attachment plug with ground conductor power cord that meets the respective European country’s safety regulations, such as VDE for Germany.