General Settings; Specifications; Service; Warranty - Pro-Ject Audio Systems Remote Box S Instruction Manual

General Settings

The menu item „General" of the settings menu allows some general
configurations: „Setup Wizard" starts the setup process all over again,
"Restore" brings the app to the factory default condition. In both cases all
programmed IR commands and all settings are irrevocably lost.

Specifications

uSB connector:
output for infrared repeater: (Socket B)
outboard power supply:
Power consumption:
Dimensions W x H x D:
Weight:
configuration program
(available for download
at www.audiotra.de):
A wireless network (WlAn) is necessary for the operation of the Remote Box S.
For the configuration program, Java has to be installed on the respective computer (preferable the newest
version, please activate the automatic update function in Java).

Service

Should you encounter a problem which you are not able to alleviate or identify, please contact your dealer for
further advice. only when the problem cannot be resolved there, the unit should be sent to the responsible
distributor in your country.

Warranty

The manufacturer accepts no responsibility for damage caused by not adhering to these instruction
manual. Modification or change to any part of the product by unauthorized persons release the
manufacturer from any liability over and above the lawful rights of the customer.

Copyright

PRo-JEcT is a Registered Trademark of
H. lichtenegger.
This guide was produced by: Audio Trade GmbH
copyright © 2011. All rights reserved.
12
Type A socket for configuration of the Remote Box S with a computer
3,5mm jack plug socket
9V/2A Dc; 220 - 240V, 50Hz
1,5W
103 x 36 x76mm
380g without power supply
for Windows: ProJect.WlAnconfig.Windows.exe
for linux (from Kernel 2.4.26 / 2.6.5): ProJect.WlAnconfig.jar
for mAc: Driver FTDIuSBSerialDriver_v2_2_16.dmg
and ProJect.WlAnconfig.jar
The information was correct at the time of going to
press. The manufacturer reserves the right to make
changes to the technical specification without prior
notice as deemed necessary to uphold the ongoing
process of technical development.