Manual Adjustment Via Pc - LG BD430 Owner's Manual

Computer input

Manual adjustment via PC

As some computer adopt special signal formats, the multi-purpose scanner of the projector may not
detect them. To match the special-format signals, the projector offers function of manual adjustment, with
which users can adjust the parameters. 5 independent memory sections is provided, where the manually
adjusted parameters can be saved. In the case of specific computer, you can make use of the memory
space to set up whenever necessary.
1 Press MENU button to display the on-screen
menu.Press ▲▼ button to select the PC adjust
icon and press ► or OK button.
2 Press ▲▼ button to select the item to be
adjusted and then OK to pop up the
corresponding dialog box. Press ◄►to set the
value.
Phase
Press ◄► to adjust the value, eliminating a flicker
from the image displayed (from 0 to 31).
Total dots
Press ◄► to adjust the total dots for a cycle so
that it can match the image on computer.
H position
Press ◄► to adjust the horizontal position of the
image.
V position
Press ◄► to adjust the vertical position of the
image.
Reset
To re-set the adjusted data, you should select the
initial state and then press OK. Click Yes when
the dialogue box appears for confirmation and all
adjusted value will return to the initial state.
Mode free
To delete the saved data, you should select the
Standby Mode, and press ► or OK button. The
mode to be deleted will be highlighted,click Select.
Store
To save the adjusted data, you should select
Save, and press ► or OK button. Then move the
cursor to select the saving mode from the items
1-5. Finally click Select.
√ Note:
If you select 480i, 576i, 480p, 576p, 720p or 1080i from the system menu, the functions of horizontal
position and vertical position will be disabled.
34
PC adjust menu
PC adjust icon