Rear Terminal - LG BD430 Owner's Manual

Rear terminal

① ②
MONO
AUDIO OUT
AUDIO IN R
⑧
① AUDIO OUT
- Connect to external audio amplifier.
- Connect the output audio signals from ② , ⑦
and ⑧ to this port.
Note: The resistance of the external audio
amplifier should be over 47kΩ, or an
earphone with lower resistance may cause
audio distortion.
② AUDIO IN(Video Mono L/R)
- Connect the audio output signal from video
equipment connected to ③ or ④ to this port.
- For a mono audio signal (a single audio jack),
connect it to L(MONO) jack.
③ VIDEO/Y, Pb/Cb, Pr/Cr
- Connect the component signals to these jacks.
- Connect the composite signals to the VIDEO/
Y jack.
④ S-VIDEO
Used to connect the S-video output of video
equipment.
③ ④
Pb/Cb S-VIDEO
L
Pr/Cr VIDEO/Y
Part names and functions
⑤ ⑥
RGB IN 1 RS-232C
RGB IN 2
RGB OUT
⑨
⑤ RGB IN 1
Used to connect a computer output.
⑥ RS-232C
When using RS-232C to control the projector,
please connect the serial control line to this
terminal.
⑦ HDMI
Used to connect the HDMI digital output.
⑧ AUDIO IN (PC)
Connect the audio output signal from computer
connected to ⑤ or ⑨ to this jack.
⑨ RGB IN 2/RGB OUT
- Used to connect the computer output.
- Used to output the analog signals from ⑤ (RGB
IN 1) to the other monitor.
⑦
HDMI
13