Advertisement
Quick Links
Advertisement
Summary of Contents for Wel-Bilt 143396
-
Page 1: Chain Saw
18V Cordless Chain Saw INSTRUCTION MANUAL WARNING: Read and understand RULES FOR SAFE OPERATION and instructions carefully before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 143396... -
Page 2: Important Safety Instructions
Thank you very much for choosing a Wel-Bilt product! For future reference, please complete the owner's record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. -
Page 3: Storing Machine
Use Right Tool Cleaning guide bar Screwdriver Cut wood only. Don't use chain saw for purpose not intended - for example Chips and sawdust will build up in the guide bar groove, - Don’t use chain saw for cutting plastic, masonry or non-wood building materials. clogging it and impairing oil flow. -
Page 4: Maintenance
1) Filing cutters CAUTION: To reduce risk of injury, charge only Wel-Bilt Battery Cartridge. Other types Use a round file 4 mm in outer diameter to file the cutters. Apply it to the cutter so that of batteries may burst causing personal injury and damage. -
Page 5: Adjusting Saw Chain Tension
(2) Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc. (3) Do not expose battery cartridge to water or rain. 6. Do not store the tool and Battery Cartridge in locations where the temperature may reach or exceed 122°F (50°C). - Page 6 • Charging time is approximately 3 hours. Fit the saw chain over the sprocket. Install the guide bar so that its concave protion will contact the saw chain • After charging, unplug the charger from the power source. tension adjusting spring. CAUTION: Tighten the bolt to secure the guide bar.
- Page 7 12-MONTH REPLACEMENT WARRANTY 12-month...