JVC AV-T2122 Service Manual page 8

AV-T2122
(4) Setting method
1) UP / DOWN key of the MENU
Select the SETTING ITEM.
2) LEFT / RIGHT key of the MENU
Setting (adjust) the SETTING VALUE of the SETTING ITEM.
When the key is released the SETTING VALUE will be stored
(memorized).
3) EXIT key
Returns to the previous screen.
[NOTE] (PICTURE MODE ONLY)
When the INITIAL SETTING VALUE is turned to yellow, you can adjust the
values but you cannot adjust the values when it is turned to red.
(Because the signal conditions, etc. are not met.)
(5) Releasing SERVICE MENU
1) After returning to the SERVICE MENU upon completion of the setting
(adjustment) work, press the EXIT key again.
★ The settings for LOW LIGHT and HIGH LIGHT are described in the WHITE
BALANCE page of ADJUSTMENT.
★ The setting for VCO (CW) are described in the IF VCO page of ADJUSTMENT.
The letter of the
selected
Items are displayed in yellow.
14
CINEMA
*** *** *** *** *** *** *** ***
TINT G DRIVE
*** *** *** *** *** *** *** ***
COLOR B DRIVE
*** *** *** *** *** *** *** ***
PICTURE R CUT.
*** *** *** *** *** *** *** ***
BRIGHT G CUT.
*** *** *** *** *** *** *** ***
DETAIL B CUT.
SELECT BY EXIT BY
I
OPERATE BY
EXIT
T
VIDEO STATUS MODE
No.51866
1. PICTURE
***** ***** ***** *****
SELECT BY
OPERATE BY
PICTURE MODE
SETTING
ITEM
1. NOISE
STATUS
SELECT BY
OPERATE BY
SOUND MODE
1. OSD HP
SELECT BY
OPERATE BY
OTHERS MODE
GAME
*** *** *** ***
TINT
*** *** *** ***
COLOR
*** *** *** ***
PICTURE
Press BRIGHT *** *** *** ***
DETAIL *** *** *** ***
VIDEO
STATUS
SELECT BY
Key
OPERATE BY
*** *** *** ***
**** **** **** ****
EXIT BY
EXIT
IT
INITIAL
SETTING VALUE
↓ (Adjust)
SETTING VALUE
*** *** *** ***
**** **** **** ****
EXIT BY
EXIT
IT
*** *** *** ***
EXIT BY
EXIT
IT
*** *** *** ***
G DRIVE
*** *** *** ***
B DRIVE
*** *** *** ***
R CUT.
G CUT. *** *** *** ***
B CUT. *** *** *** ***
EXIT BY
I
EXIT
T