Emerson Insinkerator Installation Instructions Manual page 2

Read, understand, and follow all safety information contained in these instructions prior to
installation and use of the InSinkErator
Retain these instructions for future reference.
The InSinkErator ® Instant Hot Water Dispenser Filtration System is intended for use in filtering
sediment, chlorine taste and odor from drinking water, and has not been evaluated for other
uses. The system is typically installed (near or beneath a sink) where filtered drinking water is
desired, and must be installed, operated and maintained as specified in the installation and
use instructions.
COMPONENTS IN THIS PACKAGE
2
INTRODUCTION
® Instant Hot Water Dispenser Filtration System.
A potentially hazardous situation, which, if not avoided, could result in death or serious injury.
A potentially hazardous situation, which, if not avoided, may result in minor or moderate injury.
A Filter Head and Bracket
B F-201 Filter Cartridge
C Two Polyethylene Tubes
D Quick-Connect Fitting
Ferrule
E
F
Tube Insert
G
Brass Nut