Sharp C6400U Service Manual page 37

4. Removing of 70" LCD Panel Module Unit, LCD CONTROL Unit, MAIN Unit, POWER/DRIVE Unit.
1. Remove the 24 Hooks and detach the 70" LCD Panel Module Unit
2. Remove the 2 Connecting Cords
3. Remove the 2 look screws
4. Remove the 6 lock screws
5. Remove the 5 lock screws
6. Remove the 3 lock screws
7. Remove the 12 lock screws
8. Remove the 16 lock screws
LC-52/60/70LE640U/C6400U,LC-80LE633U/844U (1st Edition)
, 6 lock screws and detach the LCD CONTROL Unit
and detach the 2 Spacers .
and detach the POWER/DRIVE Unit
and detach the MAIN PWB Shield
and detach the MAIN Unit and Terminal Angle (Bottom)
and detach the 2 Stand Fix Angle Ass'y
and detach the 4 VESA Angle Ass'y
.
.
.
.
.
.
.
4 – 18