Related Manuals for DRS Technologies DRS WatchMaster IP Elite 3000 30 Hz
Summary of Contents for DRS Technologies DRS WatchMaster IP Elite 3000 30 Hz
- Page 1 Document No: 1015454 Revision: A WatchMaster IP Elite 3000 ® F i x e d M o u n t , F i x e d F o c u s T h e r m a l I P a n d A n a l o g C a m e r a U s e r M a n u a l...
- Page 2 ©Copyright 2012-2013, DRS TECHNOLOGIES, Inc. - All rights reserved. 13532 N. Central Expressway Dallas, TX 75243 877.377.4783 www.drsinfrared.com The contents of this document may not be reproduced in whole or in part without the written consent of the copyright owner.
- Page 3 ® WatchMaster IP Elite User Manual NOTICE ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND. NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE ARE PROVIDED “AS IS” WITH ALL FAULTS. DRS DISCLAIMS ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
- Page 4 ® WatchMaster IP Elite User Manual DRS RSTA, INC. END USER LICENSE AGREEMENT ® WATCHMASTER FAMILY OF PRODUCTS SOFTWARE ® THIS LICENSE AGREEMENT IS PROOF OF YOUR RIGHT TO USE THE WATCHMASTER SOFTWARE CONTAINED IN THE ® DRS WATCHMASTER FAMILY OF PRODUCTS (THE “PRODUCTS”) AND PROVIDES ADDITIONAL INFORMATION CONCERNING DRS' LIMITED WARRANTY AND LIMITATIONS OF LIABILITY.
- Page 5 ® WatchMaster IP Elite User Manual DAMAGES OF ANY KIND (INCLUDING WITHOUT LIMITATION LOSS OF DATA, EQUIPMENT DOWNTIME OR LOST PROFITS), EVEN IF DRS OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE LIMITED WARRANTY, LIMITED REMEDIES AND LIMITED LIABILITY PROVISIONS CONTAINED IN THIS AGREEMENT ARE FUNDAMENTAL PARTS OF THE BASIS OF DRS’...
- Page 6 ® WatchMaster IP Elite User Manual E G U L A T O R Y A N D A F E T Y This equipment has been tested and found to comply with the limits of FCC Class A Part 15 Subpart B.
-
Page 7: Table Of Contents
® WatchMaster IP Elite User Manual A B L E O F O N T E N T S Introduction ........................1 Document Overview ......................1 Product Overview ......................2 IP Camera Overview ......................2 Camera Hardware ......................4 Specifications ........................6 Quick Reference Specifications .................. - Page 8 ® WatchMaster IP Elite User Manual A B L E O F I G U R E S Figure 1: Camera Hardware Overview ......................4 Figure 2: Camera Rear View ........................... 5 Figure 3: WatchMaster IP Elite Range Data ....................8 Figure 4: Camera Components ........................
- Page 9 ® WatchMaster IP Elite User Manual I S T O F A B L E S Table 1: Camera Hardware Components ......................4 Table 2: Camera LED Indicators ........................5 ® Table 3: WatchMaster IP Elite Specification Quick Reference Table ............6 Table 4: IP Elite Focus Information .......................
- Page 10 ® WatchMaster IP Elite User Manual C R O N Y M S A N D B B R E V I A T I O N S Abbreviation Description Vanadium Oxide Internet Protocol Open Network Video ONVIF Interface Forum Noise Equivalent Delta NEDT Temperature...
- Page 11 ® WatchMaster IP Elite User Manual E F E R E N C E O C U M E N T A T I O N The following documents form part of this user manual. In the event of a conflict between documents referenced herein and the contents of this user manual, the contents of this user manual shall be considered a superseding requirement.
- Page 12 When a notification is present, it is important that the user review and understand all statements related to the notification before proceeding. If questions arise, please contact your authorized dealer or DRS Technologies. Notifications are preceded by a symbol and followed by highlighted text.
- Page 13 ® WatchMaster IP Elite User Manual WARNING IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Install in accordance with the manufacturer’s instructions. Installation of the equipment must comply with local and national electrical codes. This product must be connected to a Power Over Ethernet IEEE 802.af compliant power source or a UL Listed “Class 2”...
- Page 14 ® WatchMaster IP Elite User Manual This page intentionally left blank.
-
Page 15: Introduction
® WatchMaster IP Elite User Manual N T R O D U C T I O N DOCUMENT OVERVIEW ® This document, DRS WatchMaster IP Elite 3000 Fixed Mount, Fixed Focus Thermal IP and Analog Camera User Manual, provides details about the IP Camera features, installation, access, configuration, application, interoperability,... -
Page 16: Ip Camera Overview
® WatchMaster IP Elite User Manual R O D U C T V E R V I E W IP CAMERA OVERVIEW This manual applies to the following products: ® DRS WatchMaster IP Elite 3000 30 Hz ® DRS WatchMaster IP Elite 3000 9 Hz ®... - Page 17 ® WatchMaster IP Elite User Manual Local Storage – Comes with a built-in memory for storage of video Power options –The IP camera can be powered with 12/24 volts DC or 24 volts AC, which is provided through an optional external power adapter, or through PoE (802.3af), which is provided through a supported switch.
-
Page 18: Camera Hardware
® WatchMaster IP Elite User Manual CAMERA HARDWARE Physical details of the IP Camera is provided below. Figure 1: Camera Hardware Overview Table 1: Camera Hardware Components Item Description Camera Body Base Mount Back Cover Solar Shroud 4 Hole Axis Mount Adapter (optional) Cable Sealing Gland with electrical nut Tamper Resistant Screws Stem Bumpers... -
Page 19: Figure 2: Camera Rear View
® WatchMaster IP Elite User Manual Figure 2 and Table 2 below describe the details of the rear of the camera. Figure 2: IP Elite 3000 Camera Rear View Table 2: Camera LED Indicators Item Description Accepts a standard LAN cable to connect the IP camera to a Network Port 10/100Base Switch or Router. -
Page 20: Specifications
® WatchMaster IP Elite User Manual P E C I F I C A T I O N S QUICK REFERENCE SPECIFICATIONS ® The WatchMaster IP Elite 3000 Specification are detailed below in Table 3. ® Table 3: WatchMaster IP Elite 3000 Specification Quick Reference Table Focal Plane Array Sensor Type Uncooled VOx Microbolometer... - Page 21 ® WatchMaster IP Elite User Manual Optics Lens Athermalized Fixed Focus Horizontal Field of View (HFOV) f/no Effective Focal Length 7.5 mm 19 mm 35 mm Software Administrator, Operator, and Viewer with DRS Web Interface Password Protection Hardware Embedded Memory 2 GB for Video Storage and Image Capture...
-
Page 22: Range Performance
® WatchMaster IP Elite User Manual RANGE PERFORMANCE ® The WatchMaster IP Elite 3000 range data assumptions and performance is provided below. Typical detection and recognition range performance has been modeled for multiple available lens solutions using NVTHERM . See Figure 3. ®... -
Page 23: Installation And Access
When unpacking, please note any damage that may have occurred during shipping and review the contents of the package to ensure all components are present. If any discrepancies arise, please notify your authorized dealer or DRS Technologies directly. The list of standard shipping contents is provided below. - Page 24 ® WatchMaster IP Elite User Manual WARNING This product must be connected to a Power Over Ethernet IEEE 802.af compliant power source or a UL Listed “Class 2” power supply rated 12-24V DC or 24V AC minimum 13 W or 0.54 A. CAUTION Operating the camera at voltage levels outside the specified range may result in permanent damage to the unit and void the product warranty.
-
Page 25: Installation Procedure
® WatchMaster IP Elite User Manual INSTALLATION PROCEDURE The WatchMaster® IP Elite 3000 Camera can be configured for both Ethernet/IP and Analog. The WatchMaster® IP Elite camera can be configure for Ethernet/IP only. You will need the following recommended list of tools (not included) before you can install the IP Camera. ... -
Page 26: Preparing The Cable
® WatchMaster IP Elite User Manual PREPARING THE CABLE 1. Disconnect power from the exposed cable(s) of the standard Bracket. 2. Take the number 2 Phillips head screwdriver and pierce the membrane of the cable gland. 3. If needed, pierce 2 smaller holes on the membrane of the cable gland for AC/DC power wires. 4. -
Page 27: Figure 9: Ip66 With Ethernet And Ac/Dc Power
® WatchMaster IP Elite User Manual 4. Attach one open end wrench onto the flange of the cable gland and tighten the compression nut, with the second open wrench, to approximately 50-55 in-lbs. of torque. 5. Assemble a new RJ45 head to the Cat 5 Ethernet Cable. 6. -
Page 28: Assembly
® WatchMaster IP Elite User Manual ASSEMBLY 1. Using 8 of the #6 screws, assemble the Base Mount, to the IP Camera. Tighten the 8 fasteners to approximately 10 in-lbs. of torque with the Electric Screw Driver, and T10 Security bit. 2. -
Page 29: Figure 12: Possible Configurations Of The Ip Elite
® WatchMaster IP Elite User Manual 5. Check for Solid LED on the Ethernet connector to acknowledge connectivity to the IP network. The status LED indicators are: a. LED 1: Solid Amber for 10MB connection b. LED 2: Solid Green for 100MB connection or Flashing Green for Activity 6. -
Page 30: Mounting The Camera
® WatchMaster IP Elite User Manual Figure 17: Solar Shroud with Stem Figure 18: Fully Assembled Camera Bumpers MOUNTING THE CAMERA ® 1. The WatchMaster IP Elite 3000 camera can be mounted on a Pelco or Axis Bracket. For ® Tripod mount, use the WatchMaster IP Tripod Adapter offered as an accessory. -
Page 31: Access
® WatchMaster IP Elite User Manual Figure 19: Camera mounted to the Axis Bracket ACCESS 1. After installing the WatchMaster™ IP Elite 3000 Camera, you can access the IP Camera to make configuration changes and view live video using the DRS Web Interface. In order to make these changes, you can connect to the IP Camera from any PC on your network. -
Page 32: 4.10 Login To The Ip Camera
® WatchMaster IP Elite User Manual Figure 20 Camera Discovery with Windows 7 Windows XP OS: The procedure for discovering the IP address of the camera using Windows XP requires activation of Universal Plug and Play (UPnP) service. Further details can be found in the DRS WinXP UPnP procedure document. -
Page 33: Drs Web Interface
® WatchMaster IP Elite User Manual O N F I G U R A T I O N A N D A N A G E M E N T WatchMaster™ IP Elite Camera system is an Internet Protocol (IP) networked solution, and is operational in a networked environment through a central office, remote video management system or through the DRS provided Web Interface. -
Page 34: Access Privilege
® WatchMaster IP Elite User Manual Figure 21: DRS Web Interface and Main Menu ACCESS PRIVILEGE After you log in to the WatchMaster™ IP Elite 3000 Camera, you can access the different menus and perform administrative and user actions using the DRS Web Interface. Administrators can access all of the IP camera menus, features and functions. -
Page 35: Setup
® WatchMaster IP Elite User Manual SETUP When you are logged in to the IP camera as a user with administrator privileges, you can access the configuration parameters at any time by clicking the Setup menu. For information about logging in to the IP camera, see Section 4.10 “Login to the IP Camera”. This section covers the setup of the camera. -
Page 36: Figure 23: Tcp/Ip Network Settings
® WatchMaster IP Elite User Manual Figure 23: TCP/IP Network settings... -
Page 37: Other Network Settings
® WatchMaster IP Elite User Manual OTHER NETWORK SETTINGS Table Figure through Figure 27 below provides details on configuring other IP network settings of the camera. Table 7: Other Network Settings Network Setting Description Enter the FTP Server address, FTP port, FTP user name, ftp password and the ftp path name which is a default folder in FTP Server the ftp server. - Page 38 ® WatchMaster IP Elite User Manual Network Setting Description IEEE 802.1x is an IEEE standard for port-based Network Admission Control. It provides authentication to clients (IP camera) attaching to a network port. 802.1x is based on Extensible Authentication Protocol (EAP). 802.1X is typically administered on the Ethernet Switch.
-
Page 39: Figure 24: Ftp Server Settings
® WatchMaster IP Elite User Manual Figure 24: FTP Server settings Figure 25: E-mail server settings... -
Page 40: Figure 28: Zero Network Configuration Settings
® WatchMaster IP Elite User Manual Figure 26: Ping Target settings Figure 26: 802.1X settings... -
Page 41: Accounts And Users
® WatchMaster IP Elite User Manual Figure 27: Zero Network Configuration Settings ACCOUNTS AND USERS Table 8 and Figure 28 below provide details on managing accounts and users. Table 8: Accounts and Users Accounts Description New user accounts can be created for accessing the IP camera. -
Page 42: Camera Functions
® WatchMaster IP Elite User Manual Figure 28: User Accounts CAMERA FUNCTIONS Table Figure through Figure 33: Analog Video Output Settings below provides details on the camera functions. These functions include Date/Time settings, Video Streaming, and Motion Detection. The settings for these functions can be managed by the administrator. -
Page 43: Figure 31: Camera Date And Time Settings
® WatchMaster IP Elite User Manual Figure 29: Camera Functions Menu Table 9: IP Camera Functions Camera Functions Description Camera - Date/Time NTP time clock can also be over written manually if necessary in the Camera –Date/Time menu. Enter date/time, select the NTP Server Settings time zone and enable Daylight savings if needed. -
Page 44: Figure 32: Camera Video Streaming Settings
® WatchMaster IP Elite User Manual Camera Functions Description both unicast and multicast. Amount of time in milliseconds (ms) that the embedded VLC player will cache. Settings too high may cause latency H264 Network Cache between live action and stream display. Settings too low may cause instability in the stream display. -
Page 45: Figure 34: Analog Video Output Settings
® WatchMaster IP Elite User Manual Figure 30: Camera Date and Time settings Figure 31: Camera Video Streaming settings... - Page 46 ® WatchMaster IP Elite User Manual Figure 32: Camera Motion Detection settings Figure 33: Analog Video Output Settings...
-
Page 47: Use And Application
® WatchMaster IP Elite User Manual S E A N D P P L I C A T I O N The WatchMaster® IP Elite 3000 camera can be used for a variety of Security & Surveillance Applications. Live video can be easily accessed and managed using the DRS Web Interface for any of these applications. -
Page 48: Figure 36: Live Video Image With Auto Agc
® WatchMaster IP Elite User Manual Table 10: Live Video and Controls Live Video Description Select the appropriate video stream H264, MJPEG, or HTTP JPEG. It is possible to select multiple video streams from a Video Stream single camera. However, separate browser windows are required to do this. -
Page 49: Figure 38: Motion Detection Menu
® WatchMaster IP Elite User Manual Figure 34: Live Video Image with Auto AGC Figure 35: Snapshot... -
Page 50: Motion Detection
® WatchMaster IP Elite User Manual Live video can also be viewed by using the following RTSP URLs below: Table 11: RTSP URIs Codec Transport Method rtsp://<camera ip>:8557/2?videoCodecType=H.264 H.264 UDP/TCP rtsp://<camera ip>:8555/0?videoCodecType=MJPEG MJPEG UDP/TCP rtsp://<camera ip>:8080/2?videoCodecType=H.264 H.264 HTTP rtsp://<camera ip>:8081/0?videoCodecType=MJPEG MJPEG HTTP rtsp://<camera ip>:8557/12?videoCodecType=H.264... -
Page 51: Table 12: Motion Detection
® WatchMaster IP Elite User Manual Table 12: Motion Detection Motion Detection Description Press the Enable Motion Detection button to enable the Enable Motion Detection analytics. The color of this button turns to Red. Pressing again will disable motion detection. Video Select a Region of Click and drag on the image to select a region of interest. -
Page 52: Video Storage
® WatchMaster IP Elite User Manual Figure 40: Enable Motion Detection button activated VIDEO STORAGE 6.3.1 Access to Video Storage The IP Camera can record video and store video and images on the camera internal memory. The stored video and images can be transferred to an FTP server manually. 6.3.2 Web Interface Access to Video Storage The IP Camera can record video and store video and images on the camera internal memory. -
Page 53: Figure 42: Video Archive Menu
® WatchMaster IP Elite User Manual Table Figure through Figure 40 below provide a description and a snap shot of the Video Storage menus. Figure 381: Video Storage Menu... -
Page 54: Table 13: Video Storage And Recording
® WatchMaster IP Elite User Manual Table 13: Video Storage and Recording Video Storage Description There are 3 video categories in the pull down menu. These Recorded Video categories are Constant Recorded Video, Video Archive and Category Motion Detection Capture Events. Select one of these 3 options. -
Page 55: Maintenance
® WatchMaster IP Elite User Manual Figure 403: Motion Detection Capture Menu MAINTENANCE The IP Camera is shipped with default software from the factory. DRS may make available software updates and enhancements to the IP camera from time to time. Table 14 and Figure 41 through Figure 45 provide details on the maintenance menu. -
Page 56: Figure 45: Firmware Update And Camera Configuration
Click on Log Viewer to see the list of logs. The logs Log Viewer may include camera start time, camera logout time, camera recording start time, and motion event time. Click on Copyright to see the DRS Technologies Copyright Copyright statement. -
Page 57: Figure 47: Auto Calibration Control
® WatchMaster IP Elite User Manual Figure 41: Maintenance System Status Figure 42: Firmware Update and Camera Configuration... - Page 58 ® WatchMaster IP Elite User Manual Figure 43: Camera Maintenance Functions Figure 44: Auto Calibration Control...
-
Page 59: Log Out
® WatchMaster IP Elite User Manual Figure 45: Constant Recording Control LOG OUT To log out of the IP Camera, click on the Log Out link in the main menu or click on the Log Out link at the bottom of the screen. All of the five main menus also have the Log Out link at the bottom of the screen which can be used to log out of the camera. -
Page 60: Interoperability
IP-based security products. ® DRS Technologies is a member of the ONVIF forum and the DRS WatchMaster IP Elite 3000 conforms to the ONVIF standard. ONVIF commands are exposed through the Simple Object Access Protocol (SOAP) interface which transports XML over the HTTP protocol in order to send standardized XML commands to the IP camera. -
Page 61: Maintenance And Troubleshooting
® WatchMaster IP Elite User Manual A I N T E N A N C E A N D R O U B L E S H O O T I N G MAINTENANCE The IP Camera requires very little physical maintenance. The camera has a built-in heater which provides anti icing and defogging for the camera lens. -
Page 62: Table 15: Troubleshooting Symptoms, Causes And Recommendation
® WatchMaster IP Elite User Manual Table 15: Troubleshooting Symptoms, Causes and Recommendation Symptom Possible Cause Recommendation Check the network DHCP server IP address assignments and lease. Alternatively, move the camera to an isolated network and make sure camera gets DHCP address and is Issue setting the IP DHCP address may not be accessible. -
Page 63: Warranty
® WatchMaster IP Elite User Manual A R R A N T Y ® DRS warrants the WatchMaster IP Elite 3000 Camera will perform substantially as described in the applicable User Manual during normal use for a period of twenty-four (24) months from the ®... -
Page 64: Support
® WatchMaster IP Elite User Manual U P P O R T ® For any support questions on WatchMaster IP Elite 3000 Camera, DRS may be contacted through the DRS web site or through the DRS phone number listed below. http://www.drsinfrared.com 877.377.4783...
Need help?
Do you have a question about the DRS WatchMaster IP Elite 3000 30 Hz and is the answer not in the manual?
Questions and answers