Adjusting Your Call Settings - Zte Z667 User Manual

Putting a Call on Hold
During a call, you can put it on hold by tapping More Hold.
Tip: If you accept an incoming call while you're on another call, the
first call automatically goes on hold. Tap More Swap to switch
between the two callers.
Turning the Speakerphone On/Off
Tap Speaker during a call to turn the speakerphone on. Tap
Speaker again to turn off the speakerphone.
Adding a Call
During a call, tap More Add call and dial a number. When you
call another number, the first call automatically goes on hold.
Swapping Calls
To switch between callers, tap More Swap.
Merging Calls
To merge two calls and create a conference call, tap More
Merge calls.
Note: The maximum number of callers on a call varies by carrier.
Ending a Call
Tap to finish a call.
14

Adjusting Your Call Settings

You can open the Call Settings menu by tapping
Settings.
Phone ringtone
Vibrate pattern
Vibrate when
ringing
Voicemail
Dialpad touch
tones
Quick responses
Fixed Dialing
Numbers
TTY mode
Phone Calls Phone Calls
Tap to select a ringtone. You can choose
from default ringtones, music, and voice
recordings.
Choose from five different vibration
patterns.
Check the box to enable this option.
Select a voicemail service provider (your
carrier is the default), or edit the voicemail
number if necessary.
Check this box to enable audible touch
tones for numbers on the dial pad.
Edit Quick response to rejected callers.
Restrict outgoing calls to a fixed set of
numbers. To do this you must know your
SIM's PIN2 code. Not all carriers support
this functionality.
Choose a TTY mode after connecting the
TTY device to the phone's headset port.
A TTY device can allow people who
have hearing or speech disabilities to
communicate by telephone.
15