Table of Contents
Advertisement
Options and
Additional Equipment
Suggested Cables for
Use with Terminals
Suggested Cable for
Modem Installations
RS-232-C Junction
Panel
I
Note
I
The following items are also available through HP Sales and Support Of-
fices if you did not order them with the system. The 10-metre extension
cable connects to the standard cable for greater flexibility in installation.
Use of the Test Hood is described in Chapter 4, "Troubleshooting".
27140A
Option #001:
Option #019:
Option #540:
Option #550:
27140-60003
Extension cable 10 metre, pIn 28659-63004
19 inch Rack Mounting Bracket Kit, pIn 5061-4962
Mounting Bracket Kit for 9040A Systems,
pIn 5061-4963
Mounting Bracket Kit for 92211R Cabinet,
pIn 5001-5280
Test Hood
The following cables are designed to connect the MUX RS-232-C Junc-
tion Panel to your terminals:
•
HP 13242M (5 metres)
•
HP 13242N (5 metres)
•
HP 13242Y (5 metres)
•
HP922190 (3.8 metres).
The HP 922190 cable, 5 metres long, is designed to connect the MUX to
a modem.
The RS-232-C Junction Panel (28659-60005) is a six-port junction box
which provides serial, asynchronous interconnections between the multi-
plexer card and a modem or terminal device. See Figure 1-1. This panel
has one 62-pin receptacle and six 25-pin D subminiature female connec-
tors on the front.
This RS-232-C Junction Panel is considered a field replaceable unit and
should be replaced on failure. Hewlett-Packard does not support user
maintenance of this component. Contact your HP Sales and Support
Office for additional information.
Generallnfonnation 1-5
Advertisement
Table of Contents
