Instruction For Use; Operating Environment; Cleaning - Garner PD-4 Operation Manual

Instruction for Use

When using PD-4, please pay special attention to the following. Failure to follow these procedures could cause
serious failure or malfunction.

Operating Environment:

Please do not use or keep the PD-4 in environments with excessive heat, cold, humidity, or dust.
Use caution when bringing the PD-4 from a cold environment into a warm environment. If moisture has
accumulated due to a sudden change of temperature, wait (1) hour before operating the PD-4.
Do not use the PD-4 on uneven or unstable surfaces. Only use the PD-4 on a secure horizontal surface.

Cleaning:

Please wipe dirt off with a soft and dry cloth. Do not use chemicals or solvents.
When cleaning the unit, make sure that the power is not connected, and wipe with a soft and dry cloth.
To achieve proper hard drive placement, sweep or vacuum Hard Drive debris from the inside of the PD-4.
Empty debris from the Debris Tray and remove any debris that has remained on the Support Rails. Excess
debris will alter the placement of the HDD and may cause damage to the PD-4.
Page 6