Bertucci Performance Field series Owner's Manual page 5

Setting instructions:
If packaging clip is on the crown (setting knob), please remove.
Note: Crown may already be in the out position or unscrewed.
Step 1: Turn crown counter clock-wise to unscrew crown (fig. 1).
The crown is completely unscrewed when it turns freely.
Step 2: Gently and carefully pull crown halfway out, you will feel a "click" , there
will be a bit of feel here (fig. 2).
Step 3: Turn crown either clock-wise or counter clock-wise (depending on the
model) to advance the date, continue to advance the date to
yesterday's date (fig. 3).
Step 4: Carefully pull the crown out a bit further for a second "click" . Turn the
crown clock-wise to cycle the time past midnight, you will see the date
advance to today's date. Continue to advance to set the desired time,
this will ensure the AM/PM is correct (fig. 4).
Step 5: Push crown in to re-start second hand (fig. 5).
Step 6: Push in and turn crown clock-wise to engage threads. Continue to turn
clockwise to firmly screw/rethread down crown. Do not overtighten
6
(fig. 5).
Models with date
1
4
Note: Please screw/rethread down crown (setting knob) to ensure
water resistance and maintain warranty. Do not overtighten.
Date will need to be reset for months not ending with 31 days.
2 3
5 6
7