Speed Control; Steering & Power Control; Automatic Bilge Pump - Go-Float Sun Lounger Fusion Owner's Manual

REVERSE 1 is a slow speed, good for navigating around other boats
and for docking.
REVERSE 2 is a higher speed, good for quickly slowing the boat and
for spinning weeds off of the prop.
The speed can be changed while the boat is underway, but it is
recommended to stop the motor (release thumb pressure from the "GO"
button) to change direction. Changing direction suddenly while
underway could damage the motor.
Steering and Power Control Handle
Power "GO" Button: To turn on the mo-
tor, press the "GO" button with
your thumb at the end of the
steering handle. To turn off the
motor, release thumb pressure from the
"GO" button.
IMPORTANT! Be alert for swimmers
near your boat! Always release the
"GO" button to turn off your motor when
others approach your boat.
Steering: When in forward motion, to
steer right, push the handle forward. To steer left, pull the handle back.
Steering directions are opposite when in reverse.

Automatic Bilge Pump

Automatic bilge pump. Any water that accu-
mulates inside the hull will activate the bilge pump
to automatically remove the water. Water is eject-
ed through the hull via the round plastic fitting
found on the port side of your Go-Float (shown at
left).
Keep this opening unobstructed during use of
your Go-Float.

Speed Control

Each number indicates a rate of speed.
"OFF 0" is neutral with no forward or reverse
motion.
FORWARD 1 thru 5. 1 is the slowest forward
speed, good for navigating around other boats,
for docking and beaching. Each higher number
increases speed, with 5 being the highest
speed.
"GO" Button
Right
Le turn