Summary of Contents for Go-Float Sun Lounger Fusion
Page 1
® Electric Boats Electric Boats Electric Boats Electric Boats Sun Lounger Series Sun Lounger Series Sun Lounger Series Sun Lounger Series 2014 Owners Manual 2014 Owners Manual 2014 Owners Manual 2014 Owners Manual...
Page 2
Please read this manual carefully before operating your boat. This manual will assist you in operation, safe use, and care of your Go-Float. By taking a few moments to familiarize yourself with the functions of your Go-Float, you can help make your investment last.
Overview of Go-Float Fusion & Impulse Features Fusion shown (front) Stereo Control & Cooler/ Storage Battery Meter Compartment Speed Control Cup Holder Steering Handle Starboard Port side side Seat removes to access Battery AC Plug Input Receptacle Stern (rear)
Overview of Go-Float Vortex Features (front) Cooler/ Storage Compartment Stereo Control & MP3 Player Storage Cup Holder Battery Meter Speed Control Steering Handle Port side Starboard Seat Back flips forward to access side Battery AC Plug Input Stern Receptacle (rear)
Getting Started Congratulations on your purchase of a Go-Float electric watercraft, what we consider to be the finest and simplest electric boat on the market today! This manual will simplify getting you started and on the water, enjoying your new Go-Float electric boat.
Water is eject- ed through the hull via the round plastic fitting found on the port side of your Go-Float (shown at left). Keep this opening unobstructed during use of...
, is designed to protect the motor and propeller from underwater objects while cruising or beaching your Go-Float. It is also used to stand your Go-Float on end for storage in small areas. For instructions on storing upright, see page 10. While underway it may catch weeds.
The AC Plug Receptacle is located on the deck of your Go-Float. Battery(s) can also be charged with a standard automobile battery charger. Access the battery...
Rest the boat on a flat surface on the Beach Buddy and raise the bow until the boat is completely upright and resting on its transom. Be sure that your Go-Float is out of the wind so as not to blow over.
Changing the Propeller Before doing anything with the propeller, be sure the cables to the battery are disconnected. Detaching the propeller is a simple mat- ter of unscrewing and removing the locknut using the special tool sup- plied. When doing this, take hold of the propeller to stop it from turning. Under no circumstances should you attempt to loosen the locknut with a hammer or similar tool as this may damage the locknut or shaft –...
Running the motor when dry can seriously damage the motor’s seals. Go-Float, LLC can not be responsible for accidents due to misuse, modifications or for use of the boat in any manner other than its...
Need help?
Do you have a question about the Sun Lounger Fusion and is the answer not in the manual?
Questions and answers