Wireless Networks - D-Link DWA-520 User Manual

Section  - Configuration
The Wireless Networks (Site Survey) page will display all wireless networks that are available in your area. To connect
to a network, simply highlight the wireless network (SSID) and click Connect.
SSID: The SSID (Service Set Identifier) is the name
of the wireless network.
MAC:
Displays the MAC address of the wireless
device.
Signal:
Displays the Link Quality of the wireless
connection.
Security:
If there is a "lock" icon, this means the wireless
network is secure. You must know the encryption
key/security settings to connect.
Channel:
Displays the channel of the wireless network.
WPS Button:
Make sure your access point is WPS enabled.
Click "WPS" and connect to your wireless
network with Wi-Fi Protected Setup.
Refresh Button:
Rescans for available wireless networks in your
area.
Connect Button:
Highlight a wireless network and click the
Connect button. If the network is secure, a
pop-up window will appear. Enter the security
information to connect (refer to the Wireless
Security section for more information).
Activate Button:
Select a wireless network profile from the
drop-down menu and click Activate to connect.
Allow up to 30 seconds to connect.
D-Link DWA-50 User Manual

Wireless Networks

1