Table of Contents
Advertisement
Section 4 - Wireless Connection Manager
The Wireless Networks (Site Survey) page will display all wireless networks that are available in your area. To connect to a network, simply highlight
the wireless network (SSID) and click Connect.
SSID:
The SSID (Service Set Identifier) is the name of the wireless network.
MAC:
Displays the MAC address of the wireless device.
Signal:
Displays the link quality of the wireless connection.
Security:
If there is a "lock" icon, this means the wireless network is secure (encrypted).
You must know the encryption key/password settings to connect.
Channel:
Displays the channel of the wireless network. Your adapter will automatically
change to the channel of the network you connect to.
WPS:
Press to connect to a wireless network using Wi-Fi Protected Setup (WPS). You
can use either the push-button method or PIN method, where you enter a
PIN code on your wireless router or access point and the adapter.
Refresh:
Click to rescan for available wireless networks in your area.
Connect:
Highlight a wireless network and click the Connect button. If the network is
secure, a pop-up window will appear. Enter the security information to connect
Select a wireless network profile from the drop-down menu and click Activate
Activate:
to connect. Allow up to 30 seconds to connect.
D-Link DWA-180 User Manual
Wireless Networks
22
Advertisement
Table of Contents
