LAZER TARDIZ User Manual

Thank you for purchasing the Inclination Sensor
from Lazer.
Lazer Inclination Sensor is a body posture
monitor that allows you to track your
aerodynamic cycling posture in real time. The
monitor tracks your head position and gives you,
while riding, a tactile or acoustic feedback when
you are out of your optimal aerodynamic position.
The monitor is calibrated towards your optimal
aerodynamic cycling position. To do so, you
are encouraged to visit a wind tunnel. If you
cannot visit a wind tunnel, a training centre
may also have a good idea on how you should
be positioned on a bicycle to have an optimal
aerodynamic cycling posture.
The monitor aims at making you aware of your
head position while riding.
1/
Overview parts & pieces
Inclination Sensor
usb connector
Calibration button
LEDs
on/off button
Inclination Sensor holder
USB cable
inclination sensor
2/

Location of the sensor on the helmet

The Inclination Sensor is located on the rear of a helmet,
as you can see in the figure below.
TARDIZ
3/

How to fix the sensor onto the helmet

During first use, you attach the Inclination Sensor holder
on the predefined location of your helmet with the use of
a snap if your helmet is Inclination Sensor compatible.
If your helmet is not yet Inclination Sensor compatible
you may use a velcro with a double sided tape.
WASP AIR
owner's manual /
ENG