Extend And Secure The Tow Bar; Attach The Rear Wheels - Schwinn Spirit Trailer User Manual

Extend and Secure the Tow Bar

1. Place the trailer on its side with the tow bar
on top.
Remove the
2.
locking pin from
the bracket.
Unfold the tow
3.
bar until it rests
on the front part
of the bracket.
Locking
pin
10
Tow bar
4. Insert the locking
pin through both the
bracket and tow bar.
5. Slide the metal
safety loop onto the
locking pin. Check
that it is securely
Safety
in place.
loop

Attach the Rear Wheels

Rear wheels that are not securely locked in place
may fall off the trailer and cause serious injury
or death. Always check the wheels are securely
locked in place before use.
1. Insert the rear wheel axle into the rear wheel
Locking
bracket hole. Interlock the gear on the wheel
pin
with the gear on the rear brake.
Wheel axle
2. Push the wheel into the bracket until you hear
the axle click into place.
3.
mechanism is engaged. Repeat these steps
on the opposite side.
WARNING!
Rear wheel
bracket