Table of Contents
Advertisement
531447-1_A_343c_Eng.qxd
11/11/2005
User Mode (Normal or Advanced) - An Advanced Mode is provided for users who
desire the highest level of control over the Fishing System and Normal Mode for
users who desire greater simplicity and fewer menu choices. Additional Advanced
menu choices will be displayed throughout the menu system when you navigate to
specific menus while in Advanced Mode. Any changes made while in Advanced
Mode will remain in effect after you switch back to Normal Mode. See Setup Menu
Tab: User Mode for specific instructions on changing to Advanced User Mode.
Sonar Tab, Normal Mode
Total Screen Update® - when you change any menu settings that affect the Sonar
View, the view will update immediately (i.e. you don't have to exit the menu to apply
the change to the screen).
www.Busse-Yachtshop.de
email: info@busse-yachtshop.de
9:18 PM
Page 26
Sonar Tab, Advanced Mode
21
Start-Up Options Menu
Press the MENU key when the Title screen is displayed to access the Start-Up
Options menu.
Use the UP or DOWN 4-WAY Cursor keys to position
the cursor, then the RIGHT Cursor key to select one
of the following choices. If you wait too long, the
system will default to whichever menu mode
happens to be highlighted:
• Normal
• Simulator
• System Status.
Start-Up Options Menu
See the following paragraphs for more information about each of these choices.
Normal Operation
Use Normal operation for on the water operation with a transducer connected. In
addition, your 300 Series™ Fishing System uses advanced transducer detection
methods to determine if a transducer is connected. If a functioning transducer is
connected, Normal operation will be selected automatically at power up and your
Fishing System can be used on the water.
Exit Normal operation by powering your Fishing System off.
22
Advertisement
Table of Contents
