Lightolier IS-SIL_A-D Instruction Sheet page 10

Step 3.
Step 4.
Note: Cable and Gripper (PN MI8588) for detail C must be removed from the last intermediate cable assembly, and placed Into the left over
end cap from the end set.
Safety Note: Be sure that all wires are not pinched by connection components when sliding parts together. If wires are
pinched, the fixture could short or a fire hazard could occur.
Lighting Systems
END CONNECTION
We reserve the right to change details of design, materials and finish.
IS-SIL_A-D
Figure 3