Windows 95, 98 And Me - Netopia Cayman 3346-ENT Quick Start Manual

Configure your Computer for Dynamic Addressing
The following instructions assume that you want to use the automatic configuration
and address sharing features of the Router to provide IP information to devices on
your local Ethernet network.
1. Configure your computer to use an IP address on the same TCP/IP network as
the Cayman Router:
> Windows 95, 98 and ME
On your computer, go to:
Open the network window by
double-clicking the Network Icon.
(Windows ME users: if the network icon
is hidden, click on the "View All Control
Panel Options" - a link at the left-side of
the control panel window)
In the list of network components,
highlight the entry that says
"TCP/IP (your Ethernet card here)"
and click
In the
select
Click the
DNS Configuration
Click the Gateway
Click the
Proceed to the next section "3. Configure the Netopia Cayman".
4
window that pops up,
and click
tab, select
tab, remove any installed Gateways and click
button again. When prompted, restart your computer.
and click
Disable DNS