Download Print this page
Toa WM-2100 Operating Instructions
Toa WM-2100 Operating Instructions

Toa WM-2100 Operating Instructions

Portable transmitter

Advertisement

Quick Links

PORTABLE TRANSMITTER
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.

1. SAFETY PRECAUTIONS

• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
WARNING
• Do not use the transmitter's neck strap in close proximity to the rotating machinery, such as drill presses, as
the strap could become entangled in the machinery, resulting in personal injury.
CAUTION
• When the unit is not in use for 10 days or more, be sure to take the batteries out of the unit because battery
leakage may cause personal injury, or contamination of environment.
• Make sure to observe the following handling precautions so that a fire or personal injury does not result from
leakage or explosion of the battery.
· Do not short, disassemble, heat nor put the battery into a fire.
· Never charge batteries of the type which are not rechargeable.
· Do not solder a battery directly.
· Be sure to use the specified type of batteries.
· Note correct polarity (positive and negative orientation) when inserting a battery in the unit.
· Avoid locations exposed to the direct sunlight, high temperature and high humidity when storing batteries.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.

OPERATING INSTRUCTIONS

WM-2100
133-07-218-7B

Advertisement

loading
Need help?

Need help?

Do you have a question about the WM-2100 and is the answer not in the manual?

Questions and answers

Summary of Contents for Toa WM-2100

  • Page 1: Operating Instructions

    OPERATING INSTRUCTIONS PORTABLE TRANSMITTER WM-2100 Please follow the instructions in this manual to obtain the optimum results from this unit. We also recommend that you keep this manual handy for future reference. 1. SAFETY PRECAUTIONS • Be sure to read the instructions in this section carefully before use.
  • Page 2: General Description

    • Never open nor remove the unit case to modify the unit. Refer all servicing to your nearest TOA dealer. • Take care not to drop the unit onto the floor nor bump it against a hard object as the unit could fail.
  • Page 3 • Microphone sensitivity can be changed. When using the transmitter in the high noise level area, speech clarity may be improved by reducing the sensitivity. • The WM-2100 unit features the transmission switch (press-to-talk) function, which permits signal transmission only while the transmission switch is pressed. When using this function, select an optional microphone with the transmission switch.
  • Page 4: Specifications

    Finish Resin, dark gray Dimensions 62 (w) x 163.6 (h) x 32.5 (d) mm Weight 115 g (Battery included) Note: The design and specifications are subject to change without notice for improvement. • Accessory Neck strap ..........1 URL: http://www.toa.jp/...