Icecare-05 series.
5 inch pocket mobile field assistant with ti sitara am3715 cpu, touchscreen, android 4.1.2 os, bluetooth, wi-fi, hf or uhf rfid, 5-megapixel camera, rohs compliant (74 pages)
ICECARE-10W Mobile Sales Assistant MODEL: ICECARE-10W Series 10.1” Mobile Sales Assistant with Intel® Core i7/Celeron® CPU, DDR3 SDRAM, 802.11b/g/n Wireless, Bluetooth, RFID, USB, Micro HDMI, MSR, SCR, RoHS Compliant, IP 54 Compliant Front Panel User Manual Page i Rev. 1.02 – October 3, 2014...
Page 2
ICECARE-10W Mobile Sales Assistant Revision Date Version Changes October 3, 2014 1.02 Removed Intel® Atom N2600 end-of-life processor information. April 2, 2014 1.01 Modified the CPU specifications of the model with Intel® Celeron® processor. Modified Section 3.7: Testing Smart Card Reader December 18, 2013 1.00 Initial release...
Page 3
ICECARE-10W Mobile Sales Assistant Copyright COPYRIGHT NOTICE In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages. This document contains proprietary information protected by copyright.
Page 4
ICECARE-10W Mobile Sales Assistant WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
ICECARE-10W Mobile Sales Assistant Table of Contents 1 INTRODUCTION......................1 1.1 O ........................2 VERVIEW 1.2 F ........................3 EATURES 1.3 M ....................3 ODEL ARIATIONS 1.4 F ......................4 RONT ANEL 1.4.1 Status Indicators ....................4 1.5 R ....................... 6 ANEL 1.6 S ......................
Page 6
ICECARE-10W Mobile Sales Assistant 4.5 B ....................41 LUETOOTH RIVER 4.6 W LAN D ..................43 IRELESS RIVER 4.7 RFID D ......................45 RIVER 5 BIOS SETUP ........................ 48 5.1 I ......................49 NTRODUCTION 5.1.1 Starting Setup....................49 5.1.2 Using Setup ...................... 49 5.1.3 Getting Help.....................
Page 7
ICECARE-10W Mobile Sales Assistant A.1 S .................... 77 AFETY RECAUTIONS A.1.1 General Safety Precautions ................77 A.1.2 Anti-static Precautions ..................78 A.1.3 Product Disposal ..................... 79 A.2 M ............79 AINTENANCE AND LEANING RECAUTIONS A.2.1 Maintenance and Cleaning................79 A.2.2 Cleaning Tools ....................80 B BIOS OPTIONS ......................
Page 8
ICECARE-10W Mobile Sales Assistant List of Figures Figure 1-1: ICECARE-10W Series....................2 Figure 1-2: Front Panel ........................4 Figure 1-3: Front Panel LED Indicators ..................4 Figure 1-4: Rear Panel........................6 Figure 1-5: Side Panels ........................6 Figure 1-6: Top Panel ........................7 Figure 1-7: Dimensions (units in mm) ..................9 Figure 3-1: Power Input Connector and Power LED Indicator..........15...
Page 9
ICECARE-10W Mobile Sales Assistant Figure 3-24: Check COM Port Information for MSR ..............30 Figure 3-25: 3DesHeadV1.3 Demo Program Location ..............30 Figure 3-26: 3DesHeadV1.3 – Open COM...................31 Figure 3-27: 3DesHeadV1.3 – Data Read..................31 Figure 3-28: Swipe a Magnetic Stripe Card................32 Figure 3-29: Magnetic Stripe Card Information .................32 Figure 3-30: Insert Smart Card ....................33 Figure 3-31: Smart Card Reader Testing 1.................33 Figure 3-32: Smart Card Reader Testing 2.................34...
Page 10
ICECARE-10W Mobile Sales Assistant List of Tables Table 1-1: Model Variations ......................3 Table 1-2: Status Indicators......................5 Table 1-3: Technical Specifications....................8 Table 2-1: Packing List.........................12 Table 5-1: BIOS Navigation Keys ....................50 Page x...
Page 11
ICECARE-10W Mobile Sales Assistant BIOS Menus BIOS Menu 1: Main ........................51 BIOS Menu 2: Advanced ......................52 BIOS Menu 3: ACPI Configuration ....................53 BIOS Menu 4: RTC Wake Settings ....................54 BIOS Menu 5: Trusted Computing ....................55 BIOS Menu 6: CPU Configuration ....................56 BIOS Menu 7: SATA Configuration .....................57 BIOS Menu 8: Intel(R) Rapid Start Technology .................58 BIOS Menu 9: USB Configuration ....................59...
1.1 Overview Figure 1-1: ICECARE-10W Series The ICECARE-10W Series is a mobile sales assistant with a 10.1 inch touchscreen and an IP 54 compliant front panel. The ICECARE-10W Series features an Intel® Celeron® processor 1007U or Intel® Core™ i7-3517U processor with DDR3 SDRAM memory.
RoHS compliant 1.3 Model Variations There are six models of the ICECARE-10W Series. All of the models support 802.11b/g/n wireless and Bluetooth connection and are equipped with the multi-touch projected capacitive touchscreen and a 32 GB SSD module. The model numbers and model variations are listed below.
Figure 1-2: Front Panel 1.4.1 Status Indicators Figure 1-3: Front Panel LED Indicators There are four LED indicators on the front panel of the ICECARE-10W Series as show in the figure above. Following are descriptions of their functions: Page 4...
ICECARE-10W Mobile Sales Assistant Status Indicator Description Off: the system is off or the system is fully charged Power/Battery Solid red: the system is being charged. Blinking red: the battery is low (below 9%). Solid blue: the system is turned on. Solid purple: the system is turned on and being charged.
ICECARE-10W Mobile Sales Assistant 1.5 Rear Panel The rear panel has an RFID reader, a speaker and an optional barcode scanner. Figure 1-4: Rear Panel 1.6 Side Panels The side panels have connectors, button and readers as shown in F igure 1-5. 4 7 3 Figure 1-5: Side Panels The menu button has two functions:...
LED on the front panel lights up in blue. Figure 1-6: Top Panel 1.8 Technical Specifications The technical specifications for the ICECARE-10W Series are listed in the table below. System ICECARE-10W Series CPU and Chipset 1.5GHz Intel®...
ICECARE-10W Mobile Sales Assistant Wireless LAN 802.11b/g/n Bluetooth Bluetooth v3.0 RFID 13.56 MHz RFID compliant with 14443A and 14443B Power Power Input 19 V DC input Power Adapter Input AC: 100 V ~ 240 V Output DC: 19 V DC, 2.1 A Battery 14.8 V 3500 mAh Lithium Ion Battery (non-removable) Physical Character...
If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the ICECARE-10W Series was purchased from or contact an IEI sales representative directly by sending an email to ales@ieiworld.com.
ICECARE-10W Mobile Sales Assistant Quantity Item Image ICECARE-10W Series mobile sales assistant Power adapter Utility CD Recovery CD Table 2-1: Packing List Page 12...
This helps to prevent potential ESD damage. Turn all power to the ICECARE-10W Series off: When working with the ICECARE-10W Series, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system.
3.2 Charge the Sytem To charge the ICECARE-10W Series, follow the steps below. Connect the ICECARE-10W Series with a power source through the power Step 1: adapter came with the package. The system starts to charge the battery and the power status LED lights up in Step 2: red indicating the battery is being charged.
ICECARE-10W Mobile Sales Assistant Figure 3-2: Windows Embedded 7 Power Management Screen 3.3 Power-up the System To power-up the system, push the power button on the top panel for few seconds until the power status LED on the front panel lights up in blue. Figure 3-3: Power Button and Power LED Location Page 16...
ICECARE-10W Mobile Sales Assistant NOTE: When the battery is low (below 9%), the power status LED blinks in red. Please refer to the instruction described in Section 3.1 to charge the sytem. 3.4 Using RFID Reader There is a RFID reader on the rear panel. To use the RFID reader, follow the steps below. Check the RFID status indicator on the front panel to make sure the RFID Step 1: function is enabled (see Section 1.4.1).
ICECARE-10W Mobile Sales Assistant Select Automatic from the Mode menu ( Step 5: F igure 3-6). Figure 3-6: NXP PCSC Tool – Mode Selection Choose Select a Reader from the Reader menu ( Step 6: F igure 3-7). Figure 3-7: NXP PCSC Tool – Reader Selection The Select the reader window prompts.
Figure 3-10: RFID Reader Location 3.5 Using Barcode Scanner Some models of the ICECARE-10W Series have a barcode scanner on the rear panel. To use the barcode scanner, follow the steps below. Check the barcode status indicator on the front panel to make sure the barcode Step 1: function is enabled (see Section 1.4.1).
ICECARE-10W Mobile Sales Assistant Chipset PCH-IO Configuration BIOS menu to enable it (refer to Section 5.4.1). Install EasySet barcode scanner program. Select 4.BARCODE from the list of Step 2: the driver CD as shown in F igure 3-11. 5 7 3 Figure 3-11: Barcode Scanner Program Location Double click the setup file in the folder.
ICECARE-10W Mobile Sales Assistant Figure 3-12: EasySet InstallShield Wizard Push the Menu button on the right side panel to turn on the barcode scanner. Step 4: The barcode status indicator on the front panel lights up in red (if the RFID reader is enabled at the same time, the indicator will turns from blue to purple).
ICECARE-10W Mobile Sales Assistant Figure 3-14: EasySet Window Click Communication on the tool bar and click Select communication Step 6: interface from the drop-down menu ( F igure 3-15). Figure 3-15: EasySet – Communication The Device Selection window appears ( F igure 3-16).
ICECARE-10W Mobile Sales Assistant Figure 3-16: Device Selection Window To check if the barcode scanner is connected to the EasySet, click Step 8: Communication again and see if the original option (Connect) has been changed to Disconnect. Figure 3-17: Communication – Disconnect Scan a barcode and the barcode number will be displayed on the right side Step 9: F igure 3-18).
ICECARE-10W Mobile Sales Assistant Figure 3-18: Barcode Information Display Area 3.5.1 Barcode Setting All of the barcode parameters can be modified through EasySet. To be able to modify the parameters, please make sure to connect the EasySet with the barcode scanner (refer to 3 .5).
ICECARE-10W Mobile Sales Assistant Figure 3-19: Barcode Parameters Use the Symbologies section to setup the format that can be read by the Step 2: barcode scanner (EA15). In the default setting, only the PDF417 format of 2-D barcodes is enabled. If other formats are needed, the user must enable them here.
ICECARE-10W Mobile Sales Assistant Figure 3-20: Symbologies Use the Operating settings section to configure barcode triggering modes, Step 3: decoding security and beeps, etc. Figure 3-21: Operating Settings In the Scanning/Triggering section of operating settings, the user can set the Step 4: triggering mode, continuous, level, etc.
ICECARE-10W Mobile Sales Assistant Figure 3-22: Scanning/Triggering In the Beeps/LEDs section of operating settings, the user can configure the Step 5: beep sound of the barcode scanner. Step 0: Figure 3-23: Beeps/Green Indicator LED Page 28...
C:\windows\system32\drivers 3.6 Using Magnetic Stripe Reader Some models of the ICECARE-10W Series have a magnetic stripe reader (MSR) on the left panel. To test the magnetic stripe reader, follow the steps below. Check which COM port is used for the MSR connection. Right click Step 1: “Computer”...
ICECARE-10W Mobile Sales Assistant Figure 3-24: Check COM Port Information for MSR Launch the 3DesHeadV1.3 demo program. Select 6.MSR from the list of the Step 2: driver CD. Double click the 3DesHeadV1.3 icon from the 3DesHeadV1.3 folder to launch it (Figure 3-25). Figure 3-25: 3DesHeadV1.3 Demo Program Location Page 30...
ICECARE-10W Mobile Sales Assistant Select the COM port connected to the MSR according to the information gained Step 3: from 2. Then, click the Open Com button. See Figure 3-26. Step Figure 3-26: 3DesHeadV1.3 – Open COM Click the Data Read button to start reading the card information from the MSR. Step 4: Figure 3-27: 3DesHeadV1.3 –...
ICECARE-10W Mobile Sales Assistant Swipe a magnetic stripe card through the MSR (Figure 3-28). Step 5: Figure 3-28: Swipe a Magnetic Stripe Card The card information is shown in the bottom fields (Figure 3-29). Step 6: Figure 3-29: Magnetic Stripe Card Information Page 32...
ICECARE-10W Mobile Sales Assistant 3.7 Testing Smart Card Reader Some models of the ICECARE-10W Series have a smart card reader on the left panel.To test the optional smart card reader, please follow the steps below. Inset a smart card into the smart card reader on the side panel (Figure 3-30).
ICECARE-10W Mobile Sales Assistant The following screen appears. Check Slot1 to test (all of the slots will be Step 4: checked by default) and click the Slot1 testing button to start testing. The testing result will be shown (PASS or FAIL). See Figure 3-32. Figure 3-32: Smart Card Reader Testing 2 Page 34...
Wireless LAN driver RFID driver Connect the Utility CD came with the ICECARE-10W Series to the system and follow the installation instructions given below to install the drivers. 4.2 Intel® Chipset Driver To install the chipset driver, please follow the steps below.
ICECARE-10W Mobile Sales Assistant Follow the step-by-step instruction of the installation wizard to install the Step 3: graphics driver. 4.3 Intel® Graphics Driver To install the graphics driver, please follow the steps below. Select 2.VGA from the list of the driver CD shown in F igure 4-3.
ICECARE-10W Mobile Sales Assistant Figure 4-4: Intel® Graphics Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the Step 4: graphics driver. 4.4 Audio Driver To install the driver for the speaker and the microphone, please follow the steps below. Select 3.Audio from the list of the driver CD shown in Step 1: F igure 4-5.
ICECARE-10W Mobile Sales Assistant Figure 4-5: Speaker and Microphone Driver Location Double click the setup file in the folder. The InstallShield Wizard screen Step 2: appears ( F igure 4-6). Page 40...
ICECARE-10W Mobile Sales Assistant Figure 4-6: Realtek HD Audio Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the HD Step 3: Audio driver. 4.5 Bluetooth Driver To install the Bluetooth driver, please follow the steps below. Select 5.Wireless LAN &...
ICECARE-10W Mobile Sales Assistant Figure 4-7: Bluetooth Driver Location Double click the setup file in the folder. The InstallShield Wizard screen appears. Step 2: Page 42...
ICECARE-10W Mobile Sales Assistant Figure 4-8: Bluetooth Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the Step 3: Bluetooth driver. 4.6 Wireless LAN Driver To install the wireless LAN driver, please follow the steps below. Select 5.Wireless LAN &...
ICECARE-10W Mobile Sales Assistant Figure 4-9: Wireless LAN Driver Location Double click the setup file in the folder. The InstallShield Wizard screen appears. Step 2: Page 44...
ICECARE-10W Mobile Sales Assistant Figure 4-10: Bluetooth Driver InstallShield Wizard Follow the step-by-step instruction of the installation wizard to install the Step 3: Wireless LAN driver. 4.7 RFID Driver To install the RFID driver, please follow the steps below. Select 7.RFID from the list of the driver CD shown in Step 1: F igure 4-11.
ICECARE-10W Mobile Sales Assistant Figure 4-11: RFID Driver Location Double click the setup file in the WIN7 Driver folder to install the RFID driver Step 2: F igure 4-13). 4 7 3 Figure 4-12: RFID Driver Folder Page 46...
ICECARE-10W Mobile Sales Assistant Follow the step-by-step instruction of the installation wizard to install the RFID Step 3: driver. Figure 4-13: RFID Driver Installation Page 47...
ICECARE-10W Mobile Sales Assistant 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice.
ICECARE-10W Mobile Sales Assistant Function Increase the numeric value or make changes Decrease the numeric value or make changes Page up Move to the next page Page down Move to the previous page Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -- Exit current page and return to Main Menu F1 key...
ICECARE-10W Mobile Sales Assistant 5.2 Main The Main BIOS menu ( B IOS Menu 1) appears when the BIOS Setup program is entered. 5 8 3 The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset...
ICECARE-10W Mobile Sales Assistant System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds.
ICECARE-10W Mobile Sales Assistant 5.3.1 ACPI Settings The ACPI Settings menu ( B IOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced ACPI Settings Select the highest ACPI sleep state the system ACPI Sleep State [S1 (CPU Stop Clock)]...
ICECARE-10W Mobile Sales Assistant 5.3.2 RTC Wake Settings The RTC Wake Settings menu ( B IOS Menu 4) configures RTC wake event. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event.
ICECARE-10W Mobile Sales Assistant If selected, the following appears with values that Enabled can be selected: *Wake up every day *Wake up date *Wake up hour *Wake up minute *Wake up second After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off.
ICECARE-10W Mobile Sales Assistant TPM support is disabled. Disable EFAULT TPM support is enabled. Enable 5.3.4 CPU Configuration Use the CPU Configuration menu ( B IOS Menu 6) to view detailed CPU specifications 5 8 3 and configure the CPU. Aptio Setup Utility –...
ICECARE-10W Mobile Sales Assistant 5.3.5 SATA Configuration Use the SATA Configuration menu ( B IOS Menu 7) to change and/or set the 5 8 3 configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced SATA Controller(s) [Enabled]...
ICECARE-10W Mobile Sales Assistant 5.3.7 USB Configuration Use the USB Configuration menu ( B IOS Menu 9) to read USB configuration information 5 8 3 and configure the USB settings. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced USB Configuration Enables Legacy USB...
ICECARE-10W Mobile Sales Assistant Legacy USB support disabled Disabled Legacy USB support disabled if no USB devices are Auto connected 5.3.8 iWDD Serial Ports Configuration Use the iWDD Serial Ports Configuration menu ( B IOS Menu 10) to set or change the configurations for the serial ports.
ICECARE-10W Mobile Sales Assistant 5.3.8.1 Serial Port 1 Configuration Use the Serial Port n Configuration menu ( B IOS Menu 11) to configure the serial port 1 on the docking station. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Serial Port 1 Configuration Enable or Disable Serial...
ICECARE-10W Mobile Sales Assistant Serial Port I/O port address is 3F8h and the interrupt IO=3F8h; address is IRQ3, 4 IRQ=3, 4 Serial Port I/O port address is 2F8h and the interrupt IO=2F8h; address is IRQ3, 4 IRQ=3, 4 ...
ICECARE-10W Mobile Sales Assistant Serial Port I/O port address is 3E8h and the interrupt IO=3E8h; address is IRQ3, 4 IRQ=3, 4 Serial Port I/O port address is 2E8h and the interrupt IO=2E8h; address is IRQ3, 4 IRQ=3, 4 5.3.9 H/W Monitor The H/W Monitor menu ( B IOS Menu 12) shows the operating temperature.
ICECARE-10W Mobile Sales Assistant Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced iEi Feature Auto Recovery Function Reboot and recover Auto Recovery Function [Disabled] system automatically within 10 min, when OS crashes. Please install Auto Recovery API service before enabling this function ---------------------...
ICECARE-10W Mobile Sales Assistant M_PCIE# Port Speed [Auto] Use the M_PCIE# Port Speed option to select the support type of the PCIe Mini card slot. The following options are available: Auto Default Gen1 Gen2 Azalia [Enabled] Use the Azalia option to enable or disable the High Definition Audio controller.
ICECARE-10W Mobile Sales Assistant RFID Function [Enabled] Use the RFID Function option to enable or disable the RFID function. RFID function disabled Disabled RFID function enabled Enabled EFAULT Micro-SD Function [Enabled] Use the Micro-SD Function option to enable or disable the microSD card. ...
ICECARE-10W Mobile Sales Assistant 5.4.2 System Agent (SA) Configuration Use the System Agent (SA) Configuration menu ( B IOS Menu 17) to configure the System Agent (SA) parameters. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset > Graphics Configuration Config Intel IGD Settings.
ICECARE-10W Mobile Sales Assistant Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Graphics Configuration Select which of IGFX/PEG/PCI Graphics Primary Display [Auto] device should be Primary DVMT Pre-Allocated [256M] Display Or select SG for DVMT Total Gfx Mem [MAX] Switchable Gfx.
ICECARE-10W Mobile Sales Assistant DVMT Total Gfx Mem [MAX] Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used by the internal graphic device. The following options are available: 128M 256M Default ...
ICECARE-10W Mobile Sales Assistant 5.5 Boot Use the Boot menu ( B IOS Menu 20) to configure system boot options. 5 8 4 Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Enables/Disables Quiet Boot NumLock State...
ICECARE-10W Mobile Sales Assistant Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots. Normal POST messages displayed Disabled OEM Logo displayed instead of POST messages Enabled EFAULT Option ROM Messages [Force BIOS] Use the Option ROM Messages option to set the Option ROM display mode.
ICECARE-10W Mobile Sales Assistant 5.6 Security Use the Security menu ( B IOS Menu 21) to set system and user passwords. 5 8 4 Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Password Description Set Setup Administrator Password...
ICECARE-10W Mobile Sales Assistant Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Exit system setup after Discard Changes and Reset saving the changes. Restore Defaults Save as User Defaults Restore User Defaults --------------------- : Select Screen...
Do not apply voltage levels that exceed the specified voltage range. Doing so may cause fire and/or an electrical shock. Electric shocks can occur if the ICECARE-10W Series chassis is opened when the ICECARE-10W Series is running. Do not drop or insert any objects into the ventilation openings of the ICECARE-10W Series.
ICECARE-10W Series and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the ICECARE-10W Series. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the ICECARE-10W Series is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.
Please follow the national guidelines for electrical and electronic product disposal. A.2 Maintenance and Cleaning Precautions When maintaining or cleaning the ICECARE-10W Series, please follow the guidelines below. A.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the ICECARE-10W Series, please read the details below. Page 79...
Series. A.2.2 Cleaning Tools Some components in the ICECARE-10W Series may only be cleaned using a product specifically designed for the purpose. In such case, the product will be explicitly mentioned in the cleaning tips. Below is a list of items to use when cleaning the ICECARE-10W Series.
Page 93
ICECARE-10W Mobile Sales Assistant Foam swabs - Whenever possible, it is best to use lint free swabs such as foam swabs for cleaning. Page 81...
ICECARE-10W Mobile Sales Assistant Appendix BIOS Options Page 82...
Page 95
ICECARE-10W Mobile Sales Assistant Below is a list of BIOS configuration options in the BIOS chapter. System Date [xx/xx/xx] ......................52 System Time [xx:xx:xx] .......................52 ACPI Sleep State [S1 (CPU Stop Clock)] ................53 Wake System with Fixed Time [Disabled] .................54 ...
Page 96
ICECARE-10W Mobile Sales Assistant Boot Option #1 [SATA PM: MRMAJ5A03…]..............73 Hard Drive BBS Priorities....................73 Administrator Password .....................74 User Password ........................74 Save Changes and Reset ....................75 Discard Changes and Reset ....................75 Restore Defaults ........................75 ...
ICECARE-10W Mobile Sales Assistant Appendix Terminology Page 85...
Page 98
ICECARE-10W Mobile Sales Assistant Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® AC ’97 in 1997. Advanced Configuration and Power Interface (ACPI) is an OS-directed ACPI configuration, power management, and thermal management interface. Advanced Host Controller Interface (AHCI) is a SATA Host controller AHCI register-level interface.
Page 99
ICECARE-10W Mobile Sales Assistant Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. Dual Inline Memory Modules are a type of RAM that offer a 64-bit data DIMM bus and have separate electrical contacts on each side of the module. The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices.
Page 100
ICECARE-10W Mobile Sales Assistant Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. Low-voltage differential signaling (LVDS) is a dual-wire, high-speed LVDS differential electrical signaling system commonly used to connect LCD displays to a computer.
ICECARE-10W Mobile Sales Assistant Appendix Watchdog Timer Page 89...
Page 102
ICECARE-10W Mobile Sales Assistant NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.
Page 103
ICECARE-10W Mobile Sales Assistant NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
ICECARE-10W Mobile Sales Assistant E.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
Page 106
ICECARE-10W Mobile Sales Assistant Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply Assemblies Battery This toxic or hazardous substance is contained in all of the homogeneous materials for the part is...