I Cannot See The On Screen Display; The Screen Shows Strange Colors Or Just Black And White; The Screen Suddenly Has Become Unbalanced; The Screen Is Out Of Focus Or Osd Cannot Be Adjusted - Samsung SyncMaster 2233NW User Manual

Q:
A:
A:
A:

I cannot see the On Screen Display.

Q:
A:

The screen shows strange colors or just black and white.

Q:
A:
A:
Q:
A:
Q:
A:

The screen suddenly has become unbalanced.

Q:
A:
Q:
A:
Q:

The screen is out of focus or OSD cannot be adjusted.

Q:
A:
Downloaded from ManualMonitor.com Manuals
display will work properly but the "Not Optimum Mode", "Recommended Mode 1680
x 1050 60 Hz" message appears for one minute and then disappears.
Please change to the recommended mode during this one-minute period.
(The message is displayed again if the system is rebooted.)
There is no image on the screen. Is the power indicator on the monitor blinking at 1
second intervals?
The monitor is in PowerSaver mode.
Press a key on the keyboard to activate the monitor and restore the image on the screen.
If there is still no image, press the '
again to activate the monitor and restore the image on the screen.
Have you locked the On Screen Display (OSD) Menu to prevent changes?
Unlock the OSD by pressing the [MENU/
Is the screen displaying only one color as if looking at the screen through a cellophane
paper?
Check the signal cable connection.
Make sure the video card is fully inserted in its slot.
Have the screen colors become strange after running a program or due to a crash
between applications?
Reboot the computer.
Has the video card been set properly?
Set the video card by referring to the video card manual.
Have you changed the video card or the driver?
Adjust screen image position and size using the OSD.
Have you adjusted the resolution or frequency to the monitor?
Adjust the resolution and frequency at the video card.
(Refer to the Preset Timing Modes).
The screen can be unbalanced due to the cycle of the video card signals. Readjust
Position by referring to the OSD.
Have you adjusted the resolution or frequency on the monitor?
Adjust the resolution and frequency of the video card.
Troubleshooting
' button. Then press any key on the keyboard
] button for at least 5 seconds.
42